Abstract
The effect of heating, the normal load, and the radii of the members in contact on the static coefficient of rolling friction is considered. The design of a new apparatus for measuring the parameters of rolling friction over an inclined plane at elevated temperatures is presented. A need to specify the effect of the type of the materials in contact, as well as the roughness and contact geometry, on the static coefficient of rolling friction is emphasized.
Similar content being viewed by others
References
Jeremić, B., Vukelić, D., Todorović, P.M., Macuzić, I., Pantić, M., Dzunić, D., and Tadić, B., Static friction at high contact temperatures and low contact pressure, J. Friction Wear, 2013, vol. 34, pp. 114–119.
Kragel’skii, I.V., Dobychin, M.N., and Kombalov, V.S., Osnovy raschetov na trenie i iznos (Foundations of Calculation on Friction and Wear), Moscow: Mashinostroenie, 1976.
Desai, D.A., What is rolling friction?, Resonance, 2004, vol. 9, no. 12, pp. 52–54.
Myshkin, N.K. and Petrokovets, M.I., Trenie, smazka, iznos (Friction, Lubrication, Wear), Moscow: Fizmatlit, 2007.
Maksak, V.V., Predvaritel’noe smeshchenie i kontaktnaya zhestkost’ (Preliminary Displacement and Contact Rigidity), Moscow: Nauka, 1975.
Blau, P., The significance and use of the friction coefficient, Tribol. Int., 2001, vol. 34, pp. 585–591.
Ivković, B., Djurdjanović, M., and Stamenković, D., The influence of the contact surface roughness on the static friction coefficient, Tribol. Ind., 2000, vol. 22, nos. 3–4, pp. 41–44.
Tayebi, N. and Polycarpou, A., Modeling the effect of skewness and kurtosis on the static friction coefficient of rough surfaces, Tribol. Int., 2004, vol. 37, pp. 491–505.
Myshkin, N.K., Kim, C.K., and Petrokovets, M.I., Introduction to Tribology, Seoul: CMG, 1997.
Budinski, K.G., An inclined plane test for the breakaway coefficient of rolling friction of rolling element bearings, Wear, 2005, vol. 259, pp. 1443–1447.
Olaru, D.N., Stamate, C., and Prisacaru, G., Rolling friction in a micro tribosystem, Tribology Lett., 2009, vol. 35, pp. 205–210.
Lin, Ta-Wei., Modafe, A., Shapiro, B., and Ghodssi, R., Characterization of dynamic friction in MEMS-based microball bearings, IEEE Trans. Instrum. Measur., 2004, vol. 53, pp. 839–846.
Johnson, K.L., Surface interaction between elastically loaded bodies under tangential forces, Proc. Royal Soc. London, Ser. A, Mathem. Phys. Sci., 1955, vol. 230, no. 1183, pp. 531–548.
Etsion, I. and Amit, M., The effect of small normal loads on the static friction coefficient for very smooth surfaces, J. Tribology, 1993, vol. 115, pp. 406–410.
Myshkin, N.K., Grigoriev, A.Y., and Kholodilov, O.V., Quantitative analysis of surface topography using scanning electron microscopy, Wear, 1992, vol. 153, pp. 119–133.
Chizhik, S.A., Gorbunov, V.V., and Myshkin, N.K., Analysis of molecular scale roughness effect on contact of solids based on computer modeling, Precision Eng., 1995, vol. 17, no. 3, pp. 186–191.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © P.M. Todorović, M. Blagojević, D. Vukelić, I. Mačužić, M. Jeremić, A. Simić, B. Jeremić, 2013, published in Trenie i Iznos, 2013, Vol. 34, No. 6, pp. 591–595.
About this article
Cite this article
Todorović, P.M., Blagojević, M., Vukelić, D. et al. Static coefficient of rolling friction under heating. J. Frict. Wear 34, 450–453 (2013). https://doi.org/10.3103/S1068366613060123
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366613060123