Abstract
Attention focuses on how the centering of continuous-cast billet prior to piercing affects the geometry of thin- and thick-walled sleeves at OAO Severskii Trubnyi Zavod. The influence of the depth and shape of the rear centering socket on the variation in wall thickness at the rear of the sleeve is studied.
Similar content being viewed by others
References
Romantsev, B.A., Goncharuk, A.V., and Vavilkin, N.M., Obrabotka metallov davleniem (Pressure Treatment of Metals), Moscow: Izd. Dom MISiS, 2008.
Potapov, I.N., Popov, V.A., and Romantsev, B.A., Wall-thickness variation at the front end of sleeves, Tr. MISiS. Teoriya i tekhnologiya deformatsii metallov (Proceedings of the Moscow Institute of Steel and Alloys: Theory and Technology of Metal Deformation), Moscow: Metallurgiya, 1976, issue 96, pp. 65–69.
Stoletnii, M.F. and Klempert, E.D., Tochnost’ trub (Pipe Precision), Moscow: Metallurgiya, 1975.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Kuryatnikov, A.V. Korol’, V.A. Toporov, A.I. Stepanov, O.A. Panasenko, 2014, published in “Stal’,” 2014, No. 6, pp. 71–73.
About this article
Cite this article
Kuryatnikov, A.V., Korol’, A.V., Toporov, V.A. et al. Centering of continuous-cast billet prior to piercing at OAO Severskii Trubnyi Zavod. Steel Transl. 44, 456–459 (2014). https://doi.org/10.3103/S0967091214060102
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091214060102