Abstract
The variation in strength and plastic properties of high-strength rebar (diameter 9.6 mm) for use in ferroconcrete cross ties is traced through the production process. The contribution of each operation to the specified rebar quality is assessed.
Similar content being viewed by others
References
Lebedev, V.N., Korchunov, A.G., and Chukin, M.V., Production of stabilized rebar for ferroconcrete cross ties, Metallurg, 2011, no. 1, pp. 75–78.
Chukin, M.V., Korchunov, A.G., Bakshinov, V.A., et al., Proizvodstvo vysokoprochnoi stal’noi armatury dlya zhelezobetonnykh shpal novogo pokoleniya (Production of High-Strength Steel Rebar for New-Generation Ferroconcrete Cross Ties), Moscow: Metallurgizdat, 2014.
Korchunov, A.G., Simulating the quality transformation of metal components in treatment, Vestn. Magnitogorsk. Gos. Tekhn. Univ. im. Nosova, 2009, no. 1, pp. 76–78.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.G. Korchunov, V.V. Chukin, V.A. Bakshinov, K.Yu. Kuranov, 2014, published in “Stal’,” 2014, No. 5, pp. 72–74.
This article commemorates the eightieth anniversary of Nosov Magnitogorsk State Technical University.
About this article
Cite this article
Korchunov, A.G., Chukin, V.V., Bakshinov, V.A. et al. Variation in the mechanical properties of high-strength rebar during the production process. Steel Transl. 44, 379–381 (2014). https://doi.org/10.3103/S0967091214050064
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091214050064