Abstract
The actual activity of oxygen in liquid metal is determined by means of sensors during the ladle treatment of 08X18H10T high-alloy steel. The activity of the components of the metallic and oxide solutions is calculated by means of models of a pseudosubregular solution for the liquid metal and a pseudoregular solution for the oxide slag. The corresponding energy parameters were determined in previous research. A formula is derived for the activity of oxygen in equilibrium with the components of Fe-Cr-Ni-Mn-Si-C-Al-Ti liquid steel, eight-component FeO-MnO-CaO-MgO-SiO2-CrO1.5-AlO1.5-TiO2 slag, and the gas phase. It is found that the metal-slag-gas system at the end of reduction is considerably closer to equilibrium than at the end of oxidation. The development of the reduction process is studied in terms of the difference in chemical potentials of the actual and equilibrium oxygen.
Similar content being viewed by others
References
Turkdogan, E.T., Physical Chemistry of High-Temperature Technology, New York: Academic, 1980.
Kulikov, I.S., Raskislenie metallov (The Reduction of Metals), Moscow: Metallurgiya, 1975.
Alpatov, A.V. and Paderin, S.N., Metally, 2009, no. 5, pp. 21–29.
Alpatov, A.V. and Paderin, S.N., Elektrometallurgiya, 2009, no. 9, pp. 28–36.
Japan Society for the Promotion of Science, Steelmaking Data Source Book, New York: Gordon and Breach, 1988, rev. ed.
Paderin, S.N. and Alpatov, A.V., Elektrometallurgiya, 2008, no. 9, pp. 34–41.
Shil’nikov, E.V., Alpatov, A.V., and Paderin, S.N., Elektrometallurgiya, 2013, no. 7, pp. 25–31.
Prigogine, I. and Kondepudi, D., Contemporary Thermodynamics: From Heat Engines to Dissipative Structures, New York: Wiley, 1998.
Author information
Authors and Affiliations
Additional information
Original Russian Text © E.V. Shil’nikov, A.V. Alpatov, S.N. Paderin, 2013, published in “Izvestiya VUZ. Chernaya Metallurgiya,” 2013, No. 11, pp. 19–24.
About this article
Cite this article
Shil’nikov, E.V., Alpatov, A.V. & Paderin, S.N. Behavior of oxygen in the ladle treatment of 08X18H10T high-alloy steel. Steel Transl. 43, 684–689 (2013). https://doi.org/10.3103/S0967091213110181
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091213110181