Abstract
A method is proposed for determining the basic adjustment for piercing on a rotary rolling mill with driven guide disks. Formulas are derived for the distance between the guide disks as a function of the piercing conditions.
Similar content being viewed by others
References
Potapov, I.N. and Polukhin, P.I., Tekhnologiya vintovoi prokatki (Screw Rolling), Moscow: Metallurgiya, 1990, 2nd ed.
Chekmarev, A.P., Vatkin, Ya.L., Khanin, M.I., et al., Proshivka v kosovalkovykh stanakh (Piercing in Rotary Mills), Moscow: Metallurgiya, 1967.
Teterin, P.K., Teoriya poperechno-vintovoi prokatki: uchebnik dlya vuzov (Theory of Rotary Rolling), Moscow: Metallurgiya, 1971, 2nd ed.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.V. Mul’chin, A.V. Vydrin, A.V. Korol’, A.V. Kuryatnikov, A.V. Zinchenko, 2010, published in “Stal’,” 2010, No. 8, pp. 68–70.
About this article
Cite this article
Mul’chin, V.V., Vydrin, A.V., Korol’, A.V. et al. Determining the adjustment of piercing mills with driven guide disks (Disher mills). Steel Transl. 40, 766–768 (2010). https://doi.org/10.3103/S0967091210080176
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091210080176