Communications - Scientific Letters of the University of Zilina 2018, 20(3):42-47 | DOI: 10.26552/com.C.2018.3.42-47

Numerical CFD Analysis of an Aerodynamic Head Cover of a Rotorcraft Motor

Katarzyna Szwedziak1, Tomasz Lusiak2, Zaneta Grzywacz1, Kacper Drozd2
1 Department of Biosystems Engineering, Faculty of Production Engineering and Logistics, Opole University of Technology, Poland
2 Department of Thermodynamics of Fluid Mechanics and Air Drives, Mechanical Engineering Faculty, Lublin University of Technology, Poland

Autogyros can become an alternative for the use of rotorcrafts in various fields of life, including agroforestry. They have better economic performance than helicopters, owing to, among other things, the presence of a bearing rotor. Most autogyros also have other advantages in terms of no need for the compliance with stringent regulatory regulations - with respect to new constructions, lower combustion, noise and emissions of toxic elements. The cover of the bearing rotor head is an important element of rotorcrafts, which demonstrates that aerodynamics plays an important role in aerodynamic designs. Therefore, in this article, air flow model testing is carried out for two types of the bearing rotor blades of an autogyro with and without a cover using the ANSYS Fluent program. An aerodynamic drag analysis was also performed.

Keywords: CFD numerical analysis; autogyro; aerodynamic cover; rotor head

Received: December 11, 2017; Accepted: June 6, 2018; Published: September 30, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Szwedziak, K., Lusiak, T., Grzywacz, Z., & Drozd, K. (2018). Numerical CFD Analysis of an Aerodynamic Head Cover of a Rotorcraft Motor. Communications - Scientific Letters of the University of Zilina20(3), 42-47. doi: 10.26552/com.C.2018.3.42-47
Download citation

References

  1. ABLAMOWICZ, A., NOWAKOWSKI, W.: Fundamentals of Aerodynamics and Mechanics (in Polish). WKiL, Warszawa, 1980.
  2. CZYZ, Z., LUSIAK, T., MAGRYTA, P.: Numerical Studies on the Impact of Wind Turbines on the Aerodynamic Characteristics of the Windmill (in Polish). PIL, Warszawa, 2013.
  3. CIESLAK, S.: Study of the Impact of the General Stroke Kata of the Rotor on the Properties of Volatile Gyroplane (in Polish). Warszawa, 2015.
  4. SZABELSKI K., JANCELEWICZ B., LUCJANEK W.: Introduction to the Construction of Helicopters (in Polish). WKiL, Warszawa, 1995.
  5. JURIEW, B. N.: Aerodynamics of Snails and Helicopters (in Polish). Publisher of the Ministry of National Defense, 1959.
  6. SZCZEPANIK, T., DABROWSKA, J.: Windmills, as the Anticipated Direction of Development of Centrifuges in the 21st Century (in Polish). PIL, Warszawa, 2009.
  7. BENO, L., BUGAJ, M., NOVAK, A.: Application of RCM Principles in the Air Operations. Communications - Scientific Letters of the University of Zilina, 7(2), 20-24, 2005. Go to original source...
  8. DELEGA, M.: IL-28 Windmill Head for Vertical Start (in Polish). PIL, Warszawa, 2009.
  9. KAZIMIERSKI, Z.: Basics of Mechanics of Liquids and Computer Methods of Flow Simulation (in Polish). WIST, Lodz, 2004.
  10. STALEWSKI, W.: Calculation Analysis of Aerodynamic Properties of the Windmill Rotor in the Established Flight Condition (autorotation) (in Polish). PIL, Warszawa, 2011.

This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.