Assessing Elementary Teachers' Design Knowledge Before And After Introduction Of A Design Process Model
- Conference
- Location
-
Louisville, Kentucky
- Publication Date
-
June 20, 2010
- Start Date
-
June 20, 2010
- End Date
-
June 23, 2010
- ISSN
-
2153-5965
- Conference Session
- Tagged Division
-
Educational Research and Methods
- Page Count
-
8
- Page Numbers
-
15.200.1 - 15.200.8
- DOI
-
10.18260/1-2--16289
- Permanent URL
-
https://peer.asee.org/16289
- Download Count
-
449
Paper Authors
Ming-Chien Hsu Purdue University
Ming-Chien is a doctoral student of engineering education and a research
assistant for P-12 Engineering Research and Learning (INSPIRE) at Purdue
Univeristy. She received for B.S. in Electrical Enigneering from National
Chiao Tung University, Taiwan, and a MS in Electrical Engineering from
Purdue University. Her current research focus is on engineering design and
K-12 engineering education.
Monica Cardella Purdue University
Monica Cardella is an Assistant Professor of Engineering Education and the Co-Director of Assessment Research for the Institute for P-12 Engineering Research and Learning (INSPIRE) at Purdue University. Prof. Cardella earned a BSc in mathematics from the University of Puget Sound and a MS and PhD in Industrial Engineering from the University of Washington. Her research interests include: K-12 engineering education, engineering design, the role of parents in engineering education, assessment, learning in informal environments, and mathematical thinking.
Senay Purzer Purdue University
Senay Purzer is an Assistant Professor in the School of Engineering Education at Purdue University. She is also the Co-Director of Assessment Research for the Institute for P-12 Engineering Research and Learning (INSPIRE). She received a Ph.D. and a M.A in Science Education, Department of Curriculum and Instruction from Arizona State University. Her creative research focuses on collaborative learning, design & decision-making, and the role of engineering self-efficacy on student achievement.
Abstract
NOTE: The first page of text has been automatically extracted and included below in lieu of an abstract
Development of an Instrument to Assess Elementary Teachers’ Design Process Knowledge: Findings from a Pilot Test Abstract
As more states are adding engineering to their teaching and learning standards, teacher professional development activities are necessary to foster teachers’ familiarity with engineering and design content. We are in the process of developing an instrument to assess teachers’ knowledge of the engineering design process. This paper describes findings from one pilot test of the instrument.
The instrument (the design process knowledge task) was piloted with sixty-two elementary school teachers who attended a professional development workshop that introduced an engineering design process model that the teachers could use in their classrooms. The design process knowledge task was given to the teachers before and after the workshop. Quantitative analysis showed that there were significant differences between pre-test scores and post-test scores. We discuss the findings from this pilot study in terms of the concepts of design for which the instrument captured differences as well as the concepts where the instrument did not capture differences. The findings from the study provide insights into how the instrument can be further refined as well as insights into potential areas where teachers may need additional scaffolding in order to infuse engineering in their classrooms.
Introduction
Engineering design has been identified as one of the key concepts to be learned at the K-12 level1. Recent studies have provided evidence that learning engineering content, especially engineering design, can motivate students and facilitate the learning of science2. One of the frameworks that researchers use to understand design is to characterize the process of design 3, 4. New reports on engineering education have also recognized the design process as an important part of K-12 engineering learning5.
Consequently, more and more states are adding engineering content, including design, as part of their K-12 teaching and learning standards. Efforts to include engineering at the K-12 level need to include teachers as one of the primary agents of engineering education. However, studies like the one conducted by Yasar et al. pointed out that K-12 teachers exhibited low familiarity with design and engineering content 6, which pointed out the need for teacher preparation in the field. There is a need to explore ways to assess teachers’ familiarity with engineering and design content in order to i) understand teachers’ initial understating of engineering and design and ii) make suggestions on the scaffolding we can give to teachers. We describe in this paper the efforts we made to develop an instrument that measures teachers’ knowledge about the engineering design process as well as some findings from a pilot study of the instrument.
Method
In order to assess elementary school teachers’ understanding of the engineering design process, we are in the process of developing an instrument based on an existing instrument used to
Hsu, M., & Cardella, M., & Purzer, S. (2010, June), Assessing Elementary Teachers' Design Knowledge Before And After Introduction Of A Design Process Model Paper presented at 2010 Annual Conference & Exposition, Louisville, Kentucky. 10.18260/1-2--16289
ASEE holds the copyright on this document. It may be read by the public free of charge. Authors may archive their work on personal websites or in institutional repositories with the following citation: © 2010 American Society for Engineering Education. Other scholars may excerpt or quote from these materials with the same citation. When excerpting or quoting from Conference Proceedings, authors should, in addition to noting the ASEE copyright, list all the original authors and their institutions and name the host city of the conference. - Last updated April 1, 2015