The first 3D-bioprinted personalized active bone to repair bone defects: A case report

Yongqiang Hao^1,2,3†*, Bojun Cao^1,2,3†, Liang Deng^1,2,3, Jiaxin Li^1,2,3,4,, Zhaoyang Ran^1,2,3, Junxiang Wu^1,2,3, Boran Pang^1,2,3, Jia Tan^1,2,3, Dinghao Luo^1,2,3, Wen Wu^1,2,3

Show Less

¹ Clinical and Translational Research Center for 3D Printing Technology, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, 200011, China

² Shanghai Key Laboratory of Orthopaedic Implants, Department of Orthopaedic Surgery, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, 200011, China

³ Shanghai Engineering Research Center of Innovative Orthopaedic Instruments and Personalized Medicine, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, 200011, China

⁴ Department of Orthopedics, The Second Affiliated Hospital of Harbin Medical University, Harbin, China

IJB 2023, 9(2), 654 https://doi.org/10.18063/ijb.v9i2.654

Submitted: 23 October 2022 | Accepted: 8 December 2022 | Published: 22 December 2022

(This article belongs to the Special Issue Novel Methods, Processes, and Materials of Bioprinting)

© 2022 by the Author(s). This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution 4.0 International License ( https://creativecommons.org/licenses/by/4.0/ )

Download PDF

Cite

XML

Abstract

The repair and reconstruction of bone defects are still major problems to be solved in the field of orthopedics. Meanwhile, 3D-bioprinted active bone implants may provide a new and effective solution. In this case, we used bioink prepared from the patient’s autologous platelet-rich plasma (PRP) combined with polycaprolactone/β-tricalcium phosphate (PCL/β-TCP) composite scaffold material to print personalized PCL/β-TCP/ PRP active scaffolds layer by layer through 3D bioprinting technology. The scaffold was then applied in the patient to repair and reconstruct bone defect after tibial tumor resection. Compared with traditional bone implant materials, 3D-bioprinted personalized active bone will have significant clinical application prospects due to its advantages of biological activity, osteoinductivity, and personalized design.

Keywords

Bone defect

3D bioprinting

Personalized active bone

Platelet-rich plasma

References

1. Roddy E, DeBaun MR, Daoud-Gray A, et al., 2018, Treatment of critical-sized bone defects: Clinical and tissue engineering perspectives. Eur J Orthop Surg Traumatol, 28: 351–362. https://doi.org/10.1007/s00590-017-2063-0

2. Li J, Lai Y, Li M, et al., 2022, Repair of infected bone defect with clindamycin-tetrahedral DNA nanostructure complex-loaded 3D bioprinted hybrid scaffold. Chem Eng J, 435: 134855. https://doi.org/10.1016/j.cej.2022.134855

3. Agarwal R, Garcia AJ, 2015, Biomaterial strategies for engineering implants for enhanced osseointegration and bone repair. Adv Drug Deliv Rev, 94: 53–62. https://doi.org/10.1016/j.addr.2015.03.013

4. Kruyt MC, van Gaalen SM, Oner FC, et al., 2004, Bone tissue engineering and spinal fusion: The potential of hybrid constructs by combining osteoprogenitor cells and scaffolds. Biomaterials, 25: 1463–1473. https://doi.org/10.1016/s0142-9612(03)00490-3

5. Visscher DO, Farre-Guasch E, Helder MN, et al., 2016, Advances in bioprinting technologies for craniofacial reconstruction. Trends Biotechnol, 34: 700–710. https://doi.org/10.1016/j.tibtech.2016.04.001

6. Ashammakhi N, Hasan A, Kaarela O, et al., 2019, Advancing frontiers in bone bioprinting. Adv Healthc Mater, 8: 1801048. https://doi.org/10.1002/adhm.201801048

7. Menezes DJ, Shibli JA, Gehrke SA, et al., 2017, Effect of platelet-rich plasma in alveolar distraction osteogenesis: A controlled clinical trial. Br J Oral Maxillofac Surg, 55: 447–447
https://doi.org/10.1016/j.bjoms.2016.02.003

8. Li SH, Liu YH, Tian TR, et al., 2021, Bioswitchable delivery of microRNA by framework nucleic acids: Application to bone regeneration. Small, 17: 2104359. https://doi.org/10.1002/smll.202104359

9. Masaeli R, Zandsalimi K, Rasoulianboroujeni M, et al., 2019, Challenges in three-dimensional printing of bone substitutes. Tissue Eng Part B Rev, 25: 387–397. https://doi.org/10.1089/ten.teb.2018.0381

10. Matai I, Kaur G, Seyedsalehi A, et al., 2020, Progress in 3D bioprinting technology for tissue/organ regenerative engineering. Biomaterials, 226: 119536. https://doi.org/10.1016/j.biomaterials.2019.119536

11. Wuest S, Godla ME, Mueller R, et al., 2014, Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting. Acta Biomater, 10: 630–640. https://doi.org/10.1016/j.actbio.2013.10.016

12. Zheng X, Huang J, Lin J, et al., 2019, 3D bioprinting in orthopedics translational research. J Biomater Sci Polym Ed, 30: 1172–1187. https://doi.prg/10.1080/09205063.2019.1623989

13. Byambaa B, Annabi N, Yue K, et al., 2017, Bioprinted osteogenic and vasculogenic patterns for engineering 3D bone tissue. Adv Healthc Mater, 6: 1700015. 10.1002/ adhm.201700015

14. Shahabipour F, Ashammakhi N, Oskuee RK, et al., 2020, Key components of engineering vascularized 3-dimensional bioprinted bone constructs. Transl Res, 216: 57–76. https://doi.org/10.1016/j.trsl.2019.08.010

15. Santos MI, Reis RL, 2010, Vascularization in bone tissue engineering: Physiology, current strategies, major hurdles and future challenges. Macromol Biosci, 10: 12–27. https://doi.org/10.1002/mabi.200900107

16. Kamath MS, Ahmed SS, Dhanasekaran M, et al., 2014, Polycaprolactone scaffold engineered for sustained release of resveratrol: Therapeutic enhancement in bone tissue engineering. Int J Nanomed, 9: 183–195. https://doi.org/10.2147/ijn.s49460

17. Walsh WR, Vizesi F, Michael D, et al., 2008, Beta-TCP bone graft substitutes in a bilateral rabbit tibial defect model. Biomaterials, 29: 266–271. https://doi.org/10.1016/j.biomaterials.2007.09.035

18. Wei L, Wu S, Kuss M, et al., 2019, 3D printing of silk fibroin-based hybrid scaffold treated with platelet rich plasma for bone tissue engineering. Bioactive Mater, 4: 256–260. https://doi.org/10.1016/j.bioactmat.2019.09.001

19. Marx RE, Carlson ER, Eichstaedt RM, et al., 1998, Platelet-rich plasma-Growth factor enhancement for bone grafts. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 85: 638–646. https://doi.org/10.1016/s1079-2104(98)90029-4

Previous article in this issue

Next article in this issue

International Journal of Bioprinting, Electronic ISSN: 2424-8002 Print ISSN: 2424-7723, Published by AccScience Publishing