초록

Stainless steel is known as a corrosion-resistant material and this superior ability could be a desired property for a pinhole aperture operated in a corrosive environment and thereby be able to maintain both smoothness and a perfect circular shape in order to achieve precise beam alignment. Laser drilling has widely been preferredwhen placing holes into stainless steel due to its non-contact method of machining. In addition, this method is capable of performing delicate machining while inducing relatively low amounts of heat in the affected zone in comparison with other traditional machining techniques such as punching. Laser drilling is also beneficial for specimens having a thin thickness since manufacturing tolerances are minimal in this case. In this paper, we have attempted to produce holes of various diameters in 10 m thick stainless steel foil by using a femtosecond laser trepanned method. We have demonstrated these to be of perfect circular shape and adhering to low tolerance manufacturing by adjusting the beam parameters. In addition, holes with various diameters have been made by employing previously selected machining parameters and the viability of pinhole apertures fabricated by laser drilling have been evaluated.

키워드

펨토초 레이저, 스텐레스 스틸, 핀홀, 트레팬 드릴링

참고문헌(13)open

  1. [단행본] Wilson, T. / 1995 / Handbook of biological confocal microscopy / Springer US : 167 ~ 182

  2. [학술지] Murray, J. M. / 1992 / Neuropathology in depth: the role of confocal microscopy / Journal of Neuropathology & Experimental Neurology 51 (5) : 475 ~ 487

  3. [학술지] 이진경 / 2015 / 스테인레스 316L강의 배관용접결함에 대한 유도초음파 특성 평가 / 비파괴검사학회지 35 (1) : 46 ~ 51

  4. [학술지] Guan, K. / 2013 / Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel / Materials & Design 50 : 581 ~ 586

  5. [학술지] Masuta, Yoshiyuki / 2012 / A Study of Deep-Hole Machining of Stainless Steel with Small-Diameter Drill / Advanced Materials Research Trans Tech Publications 565 : 376 ~ 381

  6. [학술지] Aziz, M. / 2012 / Innovative micro hole machining with minimum burr formation by the use of newly developed micro compound tool / Journal of Manufacturing Processes 14 (3) : 224 ~ 232

  7. [학술지] H. S. Kang / 2000 / A Study on the Welding Characteristics of Nd : YAG Laser for Thin Stainless Sheets / Journal of the Korean Society of Mechanical Technology 2 (2) : 49 ~ 55

  8. [학술지] 김가혜 / 2014 / 파이버 레이저 용접 공정을 이용한 stainless와 zircaloy-4의 용접특성 비교 / 한국기계기술학회지 16 (4) : 1727 ~ 1732

  9. [학술대회] Dhar, S. / 2006 / A review on laser drilling and its techniques / Proceedings of the International Conference of Advances in Mechanical Engineering (AME 2006) : 1 ~ 3

  10. [학술지] Walther, K. / 2008 / Enhanced processing speed in laser drilling of stainless steel by spatially and temporally superposed pulsed Nd:YAG laser radiation / The International Journal of Advanced Manufacturing Technology 35 (9-10) : 895 ~ 899

  11. [학술대회] Karnakis, D. M. / 2005 / High power DPSS laser micromachining of silicon and stainless steel / Proceedings of the 3rd International WLT Conference on Lasers in Manufacturing : 741 ~ 746

  12. [학술지] Kamlage, G. / 2003 / Deep drilling of metals by femtosecond laser pulses / Applied Physics A 77 (2) : 307 ~ 310

  13. [학술지] Juodkazis, S. / 2004 / Hole drilling in stainless steel and silicon by femtosecond pulses at low pressure / Applied Physics A 79 (4-6) : 1555 ~ 1559