Abstract
Eighteen reinforced concrete beams, including 16 beams strengthened with CFRP laminate at different levels of preload and 2 control beams, were tested to investigate the influence of preload level on flexural behavior of CFRP-strengthened RC beam. The experimental parameters include rebar ratios, number of plies of CFRP laminates and preload level at the time of strengthening. Theoretical analysis was also carried out to explain the experimental phenomena and results. The experimental and theoretical results indicated that the preload level has more influence on the stiffness and deflection of the strengthened beam, both at post-cracking and post-yielding stage, than that on the yielding and ultimate flexural strength of the strengthened beam. The main failure mode of CFRP-strengthened beam is the intermediate crack-induced debonding of CFRP laminates, provided that the development length of CFRP laminates and shear capacity of the beam are sufficient.
Similar content being viewed by others
References
ACI (ACI-Committee 318), 2002, Building Code Requirements for Structural Concrete (ACI 318-02) and Commentary (ACI 318R-02). American Concrete Institute, Farmington Hills, Michigan.
Arduini, M., Nanni, A., 1997. Behavior of precracked RC beams strengthened with carbon FRP sheets. Journal of Composites for Construction, 1(2):63–70. [doi: 10.1061/(ASCE)1090-0268(1997)1:2(63)]
Buyukozturk, O., Gunes, O., Karaca, E., 2002. Characterization and Modeling of Debonding in RC Beams Strengthened with FRP Composites. 15th ASCE Engineering Mechanics Conference, Columbia University, New York, p.1–8.
Buyukozturk, O., Gunes, O., Karaca, E., 2004. Progress on understanding debonding problems in reinforced concrete and steel members strenthened using FRP composites. Construction and Building Materials, 18(1):9–19. [doi: 10.1016/S0950-0618(03)00094-1]
Norris, T., Saadatmanesh, H., Ehsani, M.R., 1992. Shear and flexural strengthening of R/C beams with carbon fiber sheets. Journal of Structural Engineering, 123(7):903–911. [doi: 10.1061/(ASCE)0733-9445(1997)123:7(903)]
Oh, H.S., Sim, J., 2004. Interface debonding failure in beams strengthened with externally bonded GFRP. Composite Interfaces, 11(1):25–42. [doi: 10.1163/156855404322681037]
Sebastian, W.M., 2001. Significance of midspan debonding failure in FRP-plated concrete beams. Journal of Structural Engineering, 127(7):792–798. [doi: 10.1061/(ASCE)0733-9445(2001)127:7(792)]
Sharif, A., AI-Sulaimani, G.J., Basunbul, I.A., Baluch, M.H., Ghaleb, B.N., 1994. Strengthening of initially loaded RC beams using FRP plates. ACI Structural Journal, 91(2):160–168.
Shin, Y.S., Lee, C., 2003. Flexural behavior of RC beams strengthened with carbon fiber-reinforced polymer laminates at different levels of sustaining load. ACI Structural Journal, 100(2):231–239.
Smith, S.T., Teng, J.G., 2002. FRP-strengthened RC beams. I: review of debonding strength models. Engineering Structures, 24(4):385–395. [doi: 10.1016/S0141-0296(01)00105-5]
Teng, J.G., Smith, S.T., Yao, J., Chen, J.F., 2003. Intermediate crack-induced debonding in RC beams and slabs. Construction and Building Materials, 17(6–7):447–462. [doi: 10.1016/S0950-0618(03)00043-6]
Wu, Z.S., Niu, H., 2000. Study on debonding failure load of RC beams strengthened with FRP sheets. Journal of Structural Engineering, 46A:1431–1441.
Wu, Z.S., Yin, J., 2003. Fracturing behaviors of FRP-strengthened concrete structures. Engineering Fracture Mechanics, 70(10):1339–1355. [doi: 10.1016/S0013-7944(02)00100-5]
Author information
Authors and Affiliations
Additional information
Project (No. 03HK03) supported by the Science and Technology Development Foundation for College and University of Shanghai, China
Rights and permissions
About this article
Cite this article
Zhang, Ah., Jin, Wl. & Li, Gb. Behavior of preloaded RC beams strengthened with CFRP laminates. J. Zhejiang Univ. - Sci. A 7, 436–444 (2006). https://doi.org/10.1631/jzus.2006.A0436
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.2006.A0436