Abstract
The main principle and the characteristic of Predictive Functional Control (PFC) strategy are presented in this paper and the corresponding control system aid design software APC-PFC is also introduced. For a chlorinated polyethylene (CPE) process, a design scheme of cascade predictive functional control system is described and the control performance is improved obviously.
Similar content being viewed by others
References
Ata-Doss, S. A., Fiani, P. and Richalet, J., 1991. Handling Input and State Constraints in Predictive Function Control. Proceedings of the 30th Conference on Decision and Control, Brighton, England, p. 985–990.
Chu, J., 1995. The Base of Modern Control Theory. Zhejiang University Press, Hangzhou (in Chinese).
Didier, C. S., 1991. Computer aided design of weapon system guidance and control with predictive functional control technique. AGARD Conference: Software for Guidance of Control, Greece.
Richalet, J., 1987. Predictive functional control: Application to fast and accurate robots. Proc. of 10th IFAC world Congress, Munich.
Su, H. Y., Hu, J. B. and Chu, J., 2000. Robust Stabilization of Uncertain Time-Delay Systems Containing Non-linear Saturating Actuators.Journal of Zhejiang University SCIENCE,1(3): 241–248.
Xi, Y. G., 1993. Predictive Control. National Defence Industrial Press, Beijing, p. 207–214 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Additional information
Project (No. 69974035) supported by the National Natural Science Foundation of China
Rights and permissions
About this article
Cite this article
Li, Hl., Su, Hy., Liu, J. et al. Predictive functional control (PFC) and its application in chlorinated polyethylene process. J. Zhejiang Univ. Sci. A 4, 300–304 (2003). https://doi.org/10.1631/jzus.2003.0300
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.2003.0300