Abstract
The interfacial structure of Pt/Nb and Pt/Ni sputtered multilayer films was studied using x-ray diffraction in symmetric, asymmetric, and grazing incidence modes. The grazing incidence and asymmetric diffraction were used to distinguish alloying effects on the lattice spacing from strain in the films. This strain was shown to be consistent with semi-coherent interfaces in the Pt/Ni but not in the Pt/Nb in which another strain generating mechanism dominates.
Similar content being viewed by others
References
B. M. Clemens and G. L. Eesley, Phys. Rev. Lett. 61(20) (1988) p.2356.
R. C. Cammarata and K. Sieradzki, Phys. Rev. Lett. 62(17) (1989) p.2005.
J. W. Matthews, “Coherent Interfaces and Misfit Dislocations” in Epitaxial Growth, Ed. J.W. Matthews, Academic Press, N.Y., p. 559, (1975).
P. A. Flinn and G. A. Waychunas, J. Vac Sci. and Tech. B6 (6) (1988) p.1749
S. Brennan in X-rays in Materials Analysis: Novel Applications and Recent Developments (SPIE Proc. 690, San Diego, CA 1986) p. 124
P. A. Flinn and C. Chiang, J. Appl Phys, preprint, (1989).
B. D. Cullity, Elements of X-ray Diffraction, Addison-Wesley Inc., Reading, MA, pp. 454–460
W. D Nix, Course Notes: MSE 207B, Dept. of Mat. Sci., Stanford University, Stanford, CA, 167–177, 1990 (unpublished).
G. M. Lamble, S. M. Heald, and B. M. Clemens in Mater. Res. Soc. Proc. (Fall 1989 Meeting)
M. Hansen and K. Anderko, Constitution of Binary Alloys, (McGraw-Hill Book Co., New York, 1958), p.1031–1032.
S. P. Baker and W. D. Nix in Thin Films: Stresses and Mechanical Properties II edited by W. Oliver, M. Doerner, G. Pharr and F. R. Brotzen (Mater. Res. Soc. Proc. 188, Pittsburgh, PA, 1990) (to be published)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bain, J.A., Clemens, B.M. & Brennan, S. Interfacial Composition and Structue in Pt/Ni and Pt/Nb Multilayer Films. MRS Online Proceedings Library 187, 315–320 (1990). https://doi.org/10.1557/PROC-187-315
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-187-315