Abstract
Heat and water vapor transfer behavior of thermal protective clothing is greatly influenced by the air gap entrapped in multilayer fabric system. In this study, a sweating hot plate method was used to investigate the effect of air gap position and size on thermal resistance and evaporative resistance of firefighter clothing under a range of ambient temperature and humidity. Results indicated that the presence of air gap in multilayer fabric system decreased heat and water vapor transfer abilities under normal wear. Moreover, the air gap position slightly influenced the thermal and evaporative performances of the firefighter clothing. In this study, the multilayer fabric system obtained the highest thermal resistance, when the air space was located at position B. Furthermore, the effect of ambient temperature on heat and water vapor transfer properties of the multilayer fabric system was also investigated in the presence of a specific air gap. It was indicated that ambient temperature did not influence the evaporative resistance of thermal protective clothing. A thermographic image was used to test the surface temperature of multilayer fabric system when an air gap was incorporated. These results suggested that a certain air gap entrapped in thermal protective clothing system could affect wear comfort.
References
[1] Lu Y.H., Song G.W., Li J. (2013). Analysing performance of protective clothing upon hot liquid exposure using instrumented spray manikin. Ann Occup Hyg, 57 (6), 793-804.Search in Google Scholar
[2] Irzmanska E. (2016). The microclimate in protective fire fighter footwear: foot temperature and air temperature and relative humidity. Autes Res J, 16 (2), 75-79.10.1515/aut-2015-0030Search in Google Scholar
[3] Keiser C., Becker C., Rossi R.M. (2008). Water vapor transport and absorption in multilayer protective clothing fabrics. Textile Res J, 78(7), 604.10.1177/0040517507081309Search in Google Scholar
[4] Wang Y.Y., Lu Y.H., Li J., Pan J.H. (2012). Effects of air gap entrapped in multilayer fabrics and moisture on thermal protective performance. Fiber Polym, 13 (5), 647–652.10.1007/s12221-012-0647-1Search in Google Scholar
[5] Li J., Lu Y.H., Li X.H. (2012). Effect of relative humidity coupled with air gap on heat transfer of flame-resistant fabrics exposed to flash fires, Textile Res J, 82(12), 1235-1243.10.1177/0040517512436830Search in Google Scholar
[6] Tian M., Wang Z.L., Li J. (2016). 3D numerical simulation of heat transfer through simplified protective clothing during fire exposure by CFD. Int J Heat Mass Tran, 93(2), 314-321.10.1016/j.ijheatmasstransfer.2015.09.027Search in Google Scholar
[7] Torvi, D. A., Dale, J. D., Faulkner, B. (1999). Influence of air gaps on bench-top test results of flame resistant fabrics. J Fire Prot Eng, 10(1), 1–12.10.1177/104239159901000101Search in Google Scholar
[8] Song G.W. (2007). Clothing air gap layers and thermal protective performance in single layer garment. J Ind Text, 36(3), 193-205.10.1177/1528083707069506Search in Google Scholar
[9] Song G.W., Paskaluk S., Sat., Crown E.M., Dale J.D., Ackerman M. (2011). thermal protective performance of protective clothing used for low radiant heat protection. Textile Res J, 81(3), 311-323.10.1177/0040517510380108Search in Google Scholar
[10] Onofrei E., Codau T.C., Petrusic S., Bedek G., Dupont D., Soulat D. (2015). Analysis of moisture evaporative from underwear designed for fire-fighters. Autes Res J, 15 (1), 35-47.10.2478/aut-2014-0015Search in Google Scholar
[11] Yu Z.C., Zhang J.F., Lou C.W., He H.L., Chen A.B., Lin J.H. (2015). Moisture comfort and antibacterial properties of elastic warp-knitted fabrics, Autes Res J, 15 (1), 60-66.10.2478/aut-2014-0040Search in Google Scholar
[12] Yu Z.C., Zhang J.F., Lou C.W., He H.L., Chen A.B., Lin J.H. (2015). Wicking behavior and dynamic elastic recovery properties of multifunction elastic warp-knitted fabrics. Textile Res J, 85(14), 1486-1496.10.1177/0040517514566105Search in Google Scholar
[13] Yanılmaz M., Kalaoglu F. (2012). Investigation of wicking, wetting and drying properties of acrylic knitted fabrics. Textile Res J, 82(8), 820-831.10.1177/0040517511435851Search in Google Scholar
[14] Xin L.S., Li J. (2016). The relation between thermal protection performance and total heat loss of multi-layer flame resistant fabrics with the effect of considered. Fiber Polym, 17 (2), 289–297.10.1007/s12221-016-5360-zSearch in Google Scholar
[15] Udayraj., Talukdar, P., Das, A., Alagjrusamy, R. (2016). Heat and mass transfer through thermal protective clothing – A review. Int J Therm, 106, 32-56.10.1016/j.ijthermalsci.2016.03.006Search in Google Scholar
[16] Gilewicz, P., Cichocka, A., Frydrych, L. (2016). Underwear for protective clothing used by foundry worker, Fibers Textile East Eur, 24(5), 96-99.10.5604/12303666.1215533Search in Google Scholar
[17] Ding D., Tang T., Song G.W., McDonald A. (2010). Characterizing the performance of a single-layer fabric system through a heat and mass transfer model – Part I: Heat and mass transfer model. Textile Res J, 81(4), 398-411.10.1177/0040517510388547Search in Google Scholar
[18] He H.L., Yu Z.C., Song G.W. (2016). The effect of water vapor and air gap on the thermal protective performance of fabric assemblies used by wildland firefighters. J Text Inst, 107 (8), 1030-1036.Search in Google Scholar
[19] Yoo, S., Barker, R.l. (2005). Comfort properties of heat-resistant protective workwear in varying conditions of physical activity and environment. Part I: Thermophysical and Sensorial Properties of Fabrics. Textile Res J, 75(7), 523-530.10.1177/0040517505053949Search in Google Scholar
[20] Ahn, H.W., Park, C.H., Chung, S.E. (2010). Waterproof and breathable properties of nanoweb applied clothing. Textile Res J, 81(14), 1438-1447.10.1177/0040517510392462Search in Google Scholar
[21] Ding D., Tang T., Song G.W., McDonald A. (2011). Characterizing the performance of a single-layer fabric system through a heat and mass transfer model – Part II: Thermal and evaporative resistances. Textile Res J, 81(9), 945-958.10.1177/0040517510395994Search in Google Scholar
[22] Curteza A., Cretu V., Macove L., Poboroniuc M. (2016). The manufacturing of textile products with incorporated electrodes. Autes Res J, 16 (1), 13-18.10.1515/aut-2015-0049Search in Google Scholar
© 2017 Hualing He et al., published by De Gruyter Open
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.
