Details

Title

The performance of H2O, R134a, SES36, ethanol, and HFE7100 two-phase closed thermosyphons for varying operating parameters and geometry

Journal title

Archives of Thermodynamics

Yearbook

2017

Issue

No 3

Authors

Keywords

two-phase closed thermosiphon ; heat pipe ; energy efficiency ; NTU ; number of heat transfer units ; heat recovery

Divisions of PAS

Nauki Techniczne

Coverage

3-21

Publisher

The Committee of Thermodynamics and Combustion of the Polish Academy of Sciences and The Institute of Fluid-Flow Machinery Polish Academy of Sciences

Date

2017

Type

Artykuły / Articles

Identifier

DOI: 10.1515/aoter-2017-0013

Source

Archives of Thermodynamics; 2017; No 3; 3-21

References

MuszynskiT (2016), Heat transfer characteristics of hybrid microjet Microchannel cooling module, Appl Therm Eng, 1360, doi.org/10.1016/j.applthermaleng.2015.08.085 ; NoieS (2005), Heat transfer characteristics of a two - phase closed thermosyphon, Appl Therm Eng, 25, 495. ; JiaoB (2008), Investigation on the effect of filling ratio on the steady - state heat transfer performance of a vertical two - phase closed thermosyphon, Appl Therm Eng, 28, 1417. ; MuszynskiT (2017), Investigations on mixture preparation on two phase adiabatic pressure drop of a during flow in mm diameter channel Arch, null, 20, 134, doi.org/10.1515/aoter-2017-0018 ; ReayD (2013), Heat pipes Theory design applications, null. ; MuszynskiT (2016), Applicability of arrays of microjet heat transfer correlations to design compact heat exchangers, Appl Therm Eng, 105. ; OngK (2016), Thermal resistance of a thermosyphon filled with operating at low evaporator temperature, Appl Therm Eng, 15, 410, doi.org/10.1016/j.applthermaleng.2016.06.080 ; AndrzejczykR (2017), Experimental investigations on adiabatic frictional pressure drops of a during flow in mm diameter channel, Exp Therm Fluid Sci, 19, 134, doi.org/10.1016/j.expthermflusci.2016.12.016 ; AndrzejczykR (null), Analysis of the effectiveness of waste heat recovery with application of heat pipe Part Structure and operation of the measurement system design of heat pipe i in Polish, Tech, 2015. ; ElmosbahiM (2012), An experimental investigation on the gravity assisted solar heat pipe under the climatic conditions of, Tunisia Energy Convers, 11, 594. ; MikielewiczD (2016), Analytical model with nonadiabatic effects for pressure drop and heat transfer during boiling and condensation flows in conventional channels and minichannels Heat, Eng, 25, 37. ; TekeI (2010), Determining the best type of heat exchangers for heat recovery, Appl Therm Eng, 27, 577. ; CieślińskiJ (2016), Effect of nanofluid concentration on two - phase thermosyphon heat exchanger performance Arch, null, 37, doi.org/10.1515/aoter-2016-0011 ; AndrzejczykR (2014), Modern method of snow and ice remowal from operational surfaces Bud in Polish, Mater, 12, 18. ; MacGregorR (2013), Investigation of low Global Warming Potential working fluids for a closed two - phase thermosyphon, Appl Therm Eng, 16, 917. ; MuszynskiT (2016), Parametric study of fluid flow and heat transfer over louvered fins of air heat pump evaporator, Arch, 21, 37, doi.org/10.1515/aoter-2016-0019 ; KannanM (2014), An experimental study on heat transport capability of a two phase thermosyphon charged with different working fluids, Am Appl Sci, 13, 584. ; AndrzejczykR (2016), of the efectiveness of waste heat recovery Part Experimental investigations in Polish, Analysis Tech, 26. ; MaH (2016), Experimental study on heat pipe assisted heat exchanger used for industrial waste heat recovery, Appl Energy, 23, 169. ; JouharaH (2010), Experimental investigation of small diameter two - phase closed thermosyphons charged with water FC FC FC, Appl Therm Eng, 14, 77. ; AndrzejczykR (2017), Thermodynamic and geometrical characteristics of mixed convection heat transfer in the shell and coil tube heat exchanger with baffles, Appl Therm Eng, 18, doi.org/10.1016/j.applthermaleng.2017.04.053 ; BielińskiH (2016), Application of a two - phase thermosyphon loop with minichannels and a minipump in computer cooling Arch, null, 1, doi.org/10.1515/aoter-2016-0001 ; MuszynskiT (2017), and experimental investigations of a cylindrical microjet heat exchanger for waste heat recovery systems, Design Appl Therm Eng, 22, doi.org/10.1016/j.applthermaleng.2017.01.021 ; FadhlB (2013), Numerical modelling of the temperature distribution in a two - phase closed thermosyphon, Appl Therm Eng, 12, 122.

Editorial Board

International Advisory Board

J. Bataille, Ecole Central de Lyon, Ecully, France

A. Bejan, Duke University, Durham, USA

W. Blasiak, Royal Institute of Technology, Stockholm, Sweden

G. P. Celata, ENEA, Rome, Italy

L.M. Cheng, Zhejiang University, Hangzhou, China

M. Colaco, Federal University of Rio de Janeiro, Brazil

J. M. Delhaye, CEA, Grenoble, France

M. Giot, Université Catholique de Louvain, Belgium

K. Hooman, University of Queensland, Australia

D. Jackson, University of Manchester, UK

D.F. Li, Kunming University of Science and Technology, Kunming, China

K. Kuwagi, Okayama University of Science, Japan

J. P. Meyer, University of Pretoria, South Africa

S. Michaelides, Texas Christian University, Fort Worth Texas, USA

M. Moran, Ohio State University, Columbus, USA

W. Muschik, Technische Universität Berlin, Germany

I. Müller, Technische Universität Berlin, Germany

H. Nakayama, Japanese Atomic Energy Agency, Japan

S. Nizetic, University of Split, Croatia

H. Orlande, Federal University of Rio de Janeiro, Brazil

M. Podowski, Rensselaer Polytechnic Institute, Troy, USA

A. Rusanov, Institute for Mechanical Engineering Problems NAS, Kharkiv, Ukraine

M. R. von Spakovsky, Virginia Polytechnic Institute and State University, Blacksburg, USA

A. Vallati, Sapienza University of Rome, Italy

H.R. Yang, Tsinghua University, Beijing, China



×