期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:熊波,罗锡林,马瑞强,谭惠丰.梁式全碳纤维复合材料桁架模态及阻尼特性[J].哈尔滨工业大学学报,2016,48(4):60.DOI:10.11918/j.issn.0367-6234.2016.04.010
XIONG Bo,LUO Xilin,MA Ruiqiang,TAN Huifeng.Modes and damping characteristics of beam-like all carbon fiber composite truss[J].Journal of Harbin Institute of Technology,2016,48(4):60.DOI:10.11918/j.issn.0367-6234.2016.04.010
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 1824次   下载 1413 本文二维码信息
码上扫一扫!
分享到: 微信 更多
梁式全碳纤维复合材料桁架模态及阻尼特性
熊波,罗锡林,马瑞强,谭惠丰
(哈尔滨工业大学 复合材料与结构研究所,150080 哈尔滨)
摘要:
为表征梁式全碳纤维复合材料桁架模态及阻尼特性,建立实体单元有限元模型进行桁架模态仿真,提出基于仿真结果采用模态应变能阻尼模型计算结构阻尼损耗因子的方法;此外,为提高模态分析效率,引入梁等效理论建立等效分析方法.仿真及等效分析结果与实测值的对比表明:梁等效理论、仿真及实验所得振型基本一致;仿真频率及结构阻尼损耗因子计算值误差均小于10%,所述模态仿真和阻尼计算方法有效,最后基于仿真结果验证了梁等效理论针对大尺度桁架模态的分析精度.
关键词:  全复合材料桁架  模态  阻尼  模态应变能阻尼模型  梁等效理论
DOI:10.11918/j.issn.0367-6234.2016.04.010
分类号:TB322
文献标识码:A
基金项目:教育部新世纪优秀人才支持计划(NCET-08-0150).
Modes and damping characteristics of beam-like all carbon fiber composite truss
XIONG Bo, LUO Xilin, MA Ruiqiang, TAN Huifeng
(Center for Composite Materials and Structures, Harbin Institute of Technology, 150080 Harbin, China)
Abstract:
In order to obtain modes and damping characteristics of beam-like carbon fiber composite truss, a solid finite element model is established for truss modes simulation. It is then proposed to compute the structural damping loss factors based on the simulated results, using modal strain energy damping model. To improve the effciency of modes analyzation, also, an equivalent analysis approach for truss modes is presented, which is based on beam equivalence theory. Comparisons are made among the simulated results, equivalent analysis results and actual measurement, respectively, which show that vibration shapes from equivalent analysis, simulation and the experiment agree well. In addition, errors of the simulated natural frequencies and the calculated structural damping loss factors are both less than 10%. These validate the applicability of both the presented modes simulation method and damping computation method. Finally, the equivalent analysis approach is demonstrated to be rather efficient for modes of large scale truss, based on the simulation results.
Key words:  all composite truss  vibration mode  damping  modal strain energy damping model  beam equivalence theory

友情链接LINKS