Skip to main content
SpringerPlus
Download PDF

Erratum to: Description of full-range strain hardening behavior of steels

SpringerPlus volume 5, Article number: 2110 (2016) Cite this article

The Original Article was published on 11 August 2016

Erratum to: SpringerPlus (2016) 5:1316 DOI 10.1186/s40064-016-2998-3

Following the publication of our article (Li et al. 2016), we have become aware that the legends of Fig. 2 and Table 2 should read as follows:

Fig. 2 Measured stress–strain curves of the steels. a Gun steels. b Other steels. b is adapted from Figure 10 in International Journal of Nonlinear Mechanics, Vol 46(3), Hertelé S, De Waele W, Denys R, A generic stress–strain model for metallic materials with two-stage strain hardening behaviour, pp 519–531, Copyright (2010) with permission of Elsevier (Hertelé et al. 2011).

Table 2 Fitting parameters of other formulas. Data for pipeline steel, TRIP steel and stainless steel are from Table 3 in International Journal of Nonlinear Mechanics, Vol 46(3), Hertelé S, De Waele W, Denys R, A generic stress–strain model for metallic materials with two-stage strain hardening behaviour, pp 519–531, Copyright (2010) adapted with permission of Elsevier (Hertelé et al. 2011).

Reference

Download references

Author information

Authors and Affiliations

  1. Institute of Process Equipment, Zhejiang University, Hangzhou, 310027, Zhejiang, People’s Republic of China

    Tao Li & Jinyang Zheng

  2. Chinese Standardization Committee on Boilers and Pressure Vessels, Beijing, 100029, People’s Republic of China

    Zhiwei Chen

  3. High-Pressure Process Equipment and Safety Engineering Research Center of Ministry of Education, Zhejiang University, Hangzhou, 310027, Zhejiang, People’s Republic of China

    Jinyang Zheng

  4. The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, 310027, Zhejiang, People’s Republic of China

    Jinyang Zheng

Authors
  1. Tao Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jinyang Zheng
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Zhiwei Chen
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Jinyang Zheng.

Additional information

The online version of the original article can be found under doi:10.1186/s40064-016-2998-3.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Li, T., Zheng, J. & Chen, Z. Erratum to: Description of full-range strain hardening behavior of steels. SpringerPlus 5, 2110 (2016). https://doi.org/10.1186/s40064-016-3785-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s40064-016-3785-x