Erratum: Effect of Additives on Shape Evolution during Electrodeposition: I. Multiscale Simulation with Dynamically Coupled Kinetic Monte Carlo and Moving-Boundary Finite-Volume Codes [ J. Electrochem. Soc. , 154 , D230 (2007) ]

, , , , , and

Published 8 May 2007 © 2007 ECS - The Electrochemical Society
, , Citation Xiaohai Li et al 2007 J. Electrochem. Soc. 154 S15 DOI 10.1149/1.2737816

1945-7111/154/7/S15

Abstract

Abstract not Available.

Export citation and abstract BibTeX RIS

On page D231, left column, Eq. 2 should appear as

Equation (2)

On page D234, in Table I, column 2, row 15, the first element in the surface reaction should be .

Also on page D234, in Table I, in the last column under section b., the references for both solutions PEG and SPS should be 8, 43.

On page D236, in Table II, the term FEMLAB should be COMSOL in all three occurrences.

On page D236, left column, line 8 should read calculation was good to the third significant figure.

On page D236, Table III, section b., second column, the value of should be .

10.1149/1.2737816