Skip to main content
Log in

Equivalence between polymer nanocomposites and thin polymer films: Effect of processing conditions and molecular origins of observed behavior

  • Published:
The European Physical Journal Special Topics Aims and scope Submit manuscript

    We’re sorry, something doesn't seem to be working properly.

    Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.

Abstract.

Recently we established a quantitative equivalence in thermomechanical properties between polystyrene-silica nanocomposites and planar freestanding polystyrene thin films. This equivalence was quantified by drawing a direct analogy between film thickness and an appropriate experimental particle spacing. Using these findings, here we unequivocally show that the glass transition process in confined geometries is controlled by the mean volume fraction of polymer that is affected by the presence of surfaces. Since separate signatures of the bulk and the surface layers are never found, we can clearly rule out any simple “two layer” model which postulates the existence of surfaces which are dynamically decoupled from the bulk. Rather, we argue that the modification of properties at the surfaces propagates into the bulk through a spatial gradient: macroscopic experimental techniques average over these gradients and yield a broadened signature relative to the bulk polymer. In a second aspect of this paper we focus on the role of processing conditions on the results obtained. We have developed a new method of processing the nanocomposites which results in a better dispersion of the nanoparticles in the matrix. However, these samples did not show the unique glass transition behavior seen in the first set of nanocomposites discussed above. This indicates that processing conditions can profoundly affect the nature of the particle-polymer interface which controls the macroscopic behavior of these important systems.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • A. Bansal, H. Yang, C. Li, K. Cho, B.C. Benicewicz, S.K. Kumar, L.S. Schadler, Nat. Mater. 4, 693 (2005)

    Article  ADS  Google Scholar 

  • J.A. Forrest, J. Mattson, Phys. Rev. E 61, R53 (2000)

  • M.E. Mackay, A. Tuteja, P.M. Duxbury, C.J. Hawker, B.V. Horn, Z. Guan, G. Chen, R.S. Krishnan, Science 311, 1740 (2006)

    Article  ADS  Google Scholar 

  • S. Sen, Y. Xie, S.K. Kumar, H. Yang, A. Bansal, L. Hall, J.B. Hooper, K.S. Schweizer, Phys. Rev. Lett. (submitted)

  • C. Ellison, J.A. Torkelson, Nat. Mater. 2, 695 (2003)

    Article  ADS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Sen, S., Xie, Y., Bansal, A. et al. Equivalence between polymer nanocomposites and thin polymer films: Effect of processing conditions and molecular origins of observed behavior. Eur. Phys. J. Spec. Top. 141, 161–165 (2007). https://doi.org/10.1140/epjst/e2007-00034-x

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1140/epjst/e2007-00034-x

Keywords

Navigation