Abstract
AISI316L stainless steel is extensively used in orthopedic and dental applications. However, this alloy exhibits low integration behaviour when it comes in contact with surrounding bone tissue and implant healing duration can be as much as few months. The aim of this study is the fabrication of biocompatible hydroxyapatite (HA) coatings on stainless steel substrate in order to accelerate the process of osseointegration of implants. The biocompatible single layer of Titania (TiO2), Hydroxyapatite and bi-layer TiO2/HA coatings were deposited by atmospheric plasma spray on 316L stainless steel. Coated and uncoated stainless steel specimens were incubated in simulated body fluids and 0.9% NaCl solutions for 1h and 7 days. In vitro electrochemical-corrosion evaluation of coated and uncoated stainless steel specimens have been investigated by Tafel extrapolation and linear polarization methods. Results indicates that corrosion resistance of single layer HA coated stainless steel specimens are superior to single layer TiO2 and bi-layer HA/TiO2 coated stainless steel specimens.
Similar content being viewed by others
References
Hanawa, T., J. Artif. Organs, 2009, vol. 12, p. 73.
Manivasagam, G., Dhinasekaran, D., and Rajamanickam, A., Corros. Sci., 2010, vol. 2, p. 40.
Songur, M., Celikkan, H., Gokmese, F., et al., J. Appl. Electrochem., 2009, vol. 39, p. 1259.
Mudali, U.K., Sridhar, T.M., and Raj, B., Sadhana-Acad. P. Eng. S., 2003, vol. 28, p. 601.
Aksakal, B., Gavgali, M., and Dikici, B., J. Mater. Eng. Perform., 2010, vol. 19, p. 894.
Aksakal, B., Yildirim, O.S., and Gul, H., J. Fail. Anal. Prev., 2005, vol. 18, p. 101.
Cook, Y.S.D., Thomas, K.A., Harding, A.F., et al., Biomaterials, 1987, vol. 8, p. 177.
Hiromoto, L.S., Interface (London, U. K.), 2008, vol. 7, p. 41.
Amel-Farzad, H., Peivandi, M.T., and Yusof-Sani, S.M.R., Eng. Failure Anal., 2007, vol. 14, p. 1205.
Gilbert, J.L., Buckley, C.A., Jacobs, J.J., et al., J. Bone Jt. Surg., 1994, vol. 76, p. 110.
Cook, S.D., Barrack, R.L., and Clemow, A.J.T., J. Bone Jt. Surg., 1994, vol. 76, p. 68.
Fedrizzi, L., Rossi, S., Bellei, F., et al., Wear, 2002, vol. 253, p. 1173.
Liu, X., Chu, P.K., and Ding, C., Mater. Sci. Eng., R, 2004, vol. 47, p. 49.
Gaona, M., Lima, R.S., and Marple, B.R., Mater. Sci. Eng.: A, 2007, vol. 458, p. 141.
Vijayalakshmi, U., Balamurugan, A., and Rajeshwari, S., Trends Biomater. Artif. Organs, 2005, vol. 18, p. 101.
Olmo, N., Mratin, A.I., Salinas, A.J., et al., Biomaterials, 2003, vol. 24, p. 3383.
Guehennec, L.L., Soueidan, A., Layrolle, P., et al., Dent. Mater., 2007, vol. 23, p. 844.
Huang, Y., Wang, Y., Ning, C., et al., Biomed. Mater., 2007, vol. 2, p. 196.
Ishizawa, H. and Ogino, M., J. Mater. Sci., 1999, vol. 34, p. 5893.
Balamurugan, A., Kanan, S., and Rajeswari, S., Trends Biomater. Artif. Organs, 2002, vol. 16, p. 18.
Krupa, D., Baszkiewicz, J., Kozubowski, J.A., et al., Biomaterials, 2005, vol. 26, p. 2847.
Darr, J.A., Guo, Z.X., Raman, V., et al., Chem. Commun., 2004, vol. 6, p. 696.
Nelea, V., Ristoscu, C., Chiritescu, C., et al., Appl. Surf. Sci., 2000, vol. 168, p. 127.
Shi, J.Z., Chen, C.Z., Yu, H.J., et al., Bull. Mater. Sci., 2008, vol. 31, p. 877.
Sobieszczyk, S., Adv. Mater. Sci., 2010, vol. 10, p. 29.
Heimann, R.B., Plasma-Spray Coating. Principles and Application, Weinheim: VCH, 1996.
Li, H., Khor, K.A., and Cheang, P., Biomaterials, 2002, vol. 23, p. 85.
Li, H., Khor, K.A., and Cheang, P., Biomaterials, 2003, vol. 24, p. 949.
Nie, X., Leyland, A., and Matthews, A., Surf. Coat. Technol., 2000, vol. 125, p. 407.
Ye, F.X., Ohmori, A., Tsumura, T., et al., J. Therm. Spray Technol., 2007, vol. 16, p. 776.
Shuai, C., Shaokang, G., Bin, C., et al., Appl. Surf. Sci., 2011, vol. 257, p. 4464.
Gurpreet, S., Hazoor, S., and Buta, S.S., Surf. Coat. Technol., 2013, vol. 228, p. 242.
Yetim, A.F., Yildiz, F., Alsaran, A., et al., Kovove Mater., 2008, vol. 46, p. 105.
Kayali, Y., Prot. Met. Phys. Chem. Surf., 2014, vol. 50, no. 3, p. 412.
Jordan, L.R., Betts, A.J., Dahm, K.L., et al., Corros. Sci., 2005, vol. 47, p. 1085.
Xu, W., Hu, W.Y., Li, M.H., et al., Trans. Nonferrous Met. Soc. China, 2006, vol. 16, p. 209.
Mohan, L., Durgalakshmi, D., Geetha, M., et al., Ceram. Int., 2012, vol. 38, p. 3435.
Shuai, C., Shaokang, G., Bin, C., et al., Appl. Surf. Sci., 2011, vol. 257, p. 4464.
Tejinder, P.S., Harpreet, S., and Hazoor, S., J. Therm. Spray Technol., 2012, vol. 21, p. 917.
Author information
Authors and Affiliations
Corresponding author
Additional information
The article is published in the original.
Rights and permissions
About this article
Cite this article
Kayali, Y., Aslan, O., Karabaş, M. et al. Corrosion behaviour of single and double layer hydroxyapatite coatings on 316L stainless steel by plasma spray. Prot Met Phys Chem Surf 52, 1079–1085 (2016). https://doi.org/10.1134/S2070205116060113
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070205116060113