Abstract
The inhibition effect of different concentrations of benzamide (BA), sulfanilamide (SA), and thioacetamide (TA) on the corrosion of aluminium in 0.1 M NaCl solution was investigated by the methods of potentiodynamic polarization, electrochemical impedance spectroscopy, and SEM (scanning electron microscope) in this study. Impedance measurements showed that the charge transfer resistance increased whereas double layer capacitance decreased with the increase in the inhibitor concentrations. Adsorption of these inhibitors followed the Langmuir adsorption isotherm. Thermodynamic parameters of adsorption (K ads , ΔG ads ) of studied amides were calculated by using Langmiur adsorption isotherm. The surface films of the aluminium, both in solutions with and without the inhibitors, were then investigated by SEM. The results obtained showed that thioacetamide was much more effective in aluminium inhibition.
Similar content being viewed by others
References
Sherif, E.M. and Park Su-Moon, Electrochim. Acta, 2006, vol. 51, p. 1313.
Zor, S., Yazıcı, B., and Erbil, M., Corrosion Sci., 2005, vol. 47, p. 2700.
Zor, S., Dogan, P., and Yazıcı, B., Corr. Rev., 2005, vol. 23, p. 217.
Rehim, S.S.A., Hassan, H.H., and Amin, M.A., Appl. Surf. Sci., 2002, vol. 187, p. 279.
El-Shafei, A.A., Abd El-Maksoud, S.A., and Fouda, A.S., Corrosion Sci., 2004, vol. 46, p. 579.
Obot, I.B. and Obi-Egbedi, N.O., Collids and Surfaces A: Physicochem. Eng. Aspects, 2008, vol. 330, p. 207.
Lu, H., Li, Y., Corrosion Sci., 2007, vol. 49, p. 4185.
Yildirim, A. and Cetin, M., Corrosion Sci., 2008, vol. 50, p. 155.
Noor, E.A., Materials Chemistry and Physics, 2009, vol. 114, p. 533.
Mahmoud, S.S. and El Mohdy, G.A., Corrosion, 1997, vol. 53, no. 6, p. 437.
Foley, R.T. and Nguyen, T.H., J. Electrochem. Soc., 1982, vol. 129, p. 464.
Yazdzad, A.R., Shahrabi, T., and Hosseini, M.G., Materials Chemistry and Physics, 2008, vol. 109, p. 199.
Badawy, W.A., Al-Kharafi, F.M., and El-Azab, A.A., Corrosion Sci., 1999, vol. 41, p. 709.
Sato, N., Corrosion Sci., 1995, vol. 37, p. 1947.
Osman, M.M., Mater. Chem. Phys., 2001, vol. 71, p. 12.
Yurt, A., Ulutaş, S., and Dal, H., Appl. Surf. Sci., 2006, vol. 253, p. 919.
Khaled, K.F., Al-Qahtani, M.M., Materials Chemistry and Physics, 2009, vol. 113, p. 150.
Fang, J. and Li, J., J. of Molecular Structure (Theochem.), 2002, vol. 593, p. 179.
Ebenso, K., Fekpe, U.J., Ha, B.I., et al., Materials Chemistry and Physics, 1999, vol. 60, p. 79.
Kandemirli, F. and Sagdinc, S., Corrosion Sci., 2007, vol. 49, p. 2118.
Zhang, D.Q., Cai, Q.R., He, X.M., et al, Materials Chemistry and Physics, 2008, vol. 112, p.353.
Quatarone, G., Battilana, M., Banaldo, L., and Tortato, T., Corrosion Sci., 2008, vol. 50, p. 3467.
Hsu, C.H. and Mansfeld, F., Corrosion, 2001, vol. 57, p. 747.
Goncalves, R.S., Azambujo, D.S., and Serpa Lucho, A.M., Corrosion, 2002, vol. 44, p. 467.
Author information
Authors and Affiliations
Corresponding author
Additional information
The article is published in the original.
Rights and permissions
About this article
Cite this article
Zor, S., Özkazanç, H. The inhibition effect of amides on aluminium corrosion in chloride solutions. Prot Met Phys Chem Surf 46, 727–733 (2010). https://doi.org/10.1134/S2070205110060171
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070205110060171