Abstract—
The article presents the results from analyzing the application conditions of the thermophysical processes similarity theory as applied to modeling the hydrodynamics and heat transfer in liquid-metal cooled nuclear power facilities, namely, in channels, in the reactor core rod systems, and in the reactor pressure vessel under different operating conditions. It is shown that direct modeling can be used without limitations only for processes whose determined similarity numbers (criteria) are functions of only the system’s geometrical simplexes and one determining criterion. The availability of two determining criteria in the heat transfer description, e.g., the Reynolds and Prandtl numbers, noticeably complicates the modeling. With three determining criteria, direct modeling is impracticable as a rule. In such cases, systematic multivariate experiments must be set up. The aim of such experiments is to reveal the effects that are allowed by the general mathematical model but which cannot be simulated—either analytically or numerically—using state-of-the-art mathematical technologies. It has been shown from numerical and theoretical investigations and from generalization of experiments, including data on temperature distribution patterns in a liquid-metal flow, that the thermal resistance at the coolant–heat-transfer surface interface boundary is essentially zero if the concentration of impurities in the coolant does not exceed their solubility at the circulating metal temperature. In the case of using liquid metals and alloys (Pb, Pb–Bi, Hg, Na, Na–K, Li, etc.), the heat transfer is described under such conditions by a unified dimensionless dependence on the Peclet number. The transfer of heat in fuel assemblies takes place mainly by convective heat transfer, and the temperature field is governed by the increase in liquid-metal temperature. The temperature distribution depends on the classical similarity criteria, including the Reynolds, Peclet (Prandtl), and Grashof criteria, and on the design and thermophysical characteristics of fuel elements and fuel assemblies (the latter serve as the fuel element approximate similarity criterion). Forced circulation in the reactor vessel is simulated in small-scale water models using the Froude and Peclet numbers, and natural circulation is simulated using the Euler number. The similarity of currents in stably stratified coolant zones is determined by the Froude and Peclet numbers and by the local-gradient Richardson number.
Similar content being viewed by others
REFERENCES
A. P. Sorokin, Yu. A. Kuzina, A. A. Trufanov, A. A. Kamaev, Yu. I. Orlov, V. V. Alekseev, V. A. Grabezhnaya, and Yu. I. Zagorul’ko, “The challenging thermophysical issues of fast reactors,” Therm. Eng. 65, 725–733 (2018). https://doi.org/10.1134/S0040601518100105
Thermophysical Test Stand Base of Nuclear Power Generation of Russia and Kazakhstan, Ed. by V. A. Pershukov, A. V. Arkhangel’skii, O. E. Kononov, and A. P. Sorokin (FGUP RFYaTs – VNIIEF, Sarov, 2016).
A. A. Gukhman and M. V. Kirpichev, “Theory of models,” Izv. Leningr. Politekh. Inst. Im. M. I. Kalinina 30, 1–50 (1927).
L. I. Sedov, Methods of Similarity and Dimensionality in Mechanics, 4th ed. (Gos. Izd. Nauchno-Tekh. Lit., Moscow, 1957) [in Russian].
M. V. Kirpichev and M. A. Mikheev, Modeling of Thermal Devices in Mechanics (Akad. Nauk SSSR, Moscow, 1936) [in Russian].
A. A. Gukhman, Application of Similarity Theory to Investigation of Heat and Mass Transfer Processes (Vysshaya Shkola, Moscow, 1973) [in Russian].
S. S. Kutateladze, Analysis of Similarity in Thermal Physics (Nauka, Novosibirsk, 1982) [in Russian].
S. S. Kutateladze, Analysis of Similarity and Physical Models (Nauka, Novosibirsk, 1986) [in Russian].
S. S. Kutateladze, Analysis of Similarity and Physical Models (Nauka, Novosibirsk, 1989), pp. 410–416 [in Russian].
V. V. Yagov, Heat Transfer in One-Phase Media and during Phase Transformations (Mosk. Energ. Inst., Moscow, 2014) [in Russian].
P. L. Kirillov, Yu. S. Yur’ev, and V. P. Bobkov, Handbook on Thermohydraulic Calculations (Nuclear Reactors, Heat Exchangers, Steam Genetarors), 2nd ed., Ed. by P. L. Kirillov (Energoatomizdat, Moscow, 1990) [in Russian].
P. L. Kirillov, M. I. Terent’eva, and N. B. Deniskina, Thermophysical Properties of Nuclear Engineering Materials: Study and Reference Aid, Ed. by P. L. Kirillov (IzdAt, Moscow, 2007) [in Russian].
N. S. Kondrat’ev, “Flow resistance in the liquid metal flow in pipes,” in Heat Transfer and Thermal Modeling (Akad. Nauk SSSR, Moscow, 1959), pp. 93–106.
P. K. Konakov, “Slip coefficient for smooth pipes,” Izv. Akad. Nauk SSSR, No. 7, 1029 (1948).
A. A. Kanaev, “Heat transfer and flow resistance in the mercury flow in pipes,” Kotloturbostroenie, No. 2 (1953).
E. Varburg, “On the flow of mercury in glass capillars,” Ann. Phys. 140, 367 (1870).
D. M. Tolstoi, “Sliding of mercury over glass,” Dokl. Akad. Nauk SSSR. 85, 1329 (1952).
J. Brighton, “Fully developed turbulent flow in a channel of annular section,” Teor. Osnovy Inzh. Raschetov., No. 4, 240 (1964).
V. I. Rachkov, A. P. Sorokin, and A. V. Zhukov, “Thermal hydraulic studies of liquid-metal coolants in nuclear-power facilities,” High Temp. 56, 124–137 (2018).
L. G. Genin, E. V. Kudryavtseva, Yu. A. Pakhotin, and V. G. Sviridov, “Temperature fields and heat transfer in the turbulent liquid metal flow in the initial thermal region,” Teplofiz. Vys. Temp. 16, 1243–1249 (1978).
L. G. Genin, E. V. Kudryavtseva, Yu. A. Pakhotin, and V. G. Sviridov, “On the question of the structure of the temperature field in the turbulent flow in pipes,” Teplofiz. Vys. Temp. 17, 531–538 (1979).
I. A. Belyaev, L. G. Genin, S. G. Krylov, A. O. Novikov, N. G. Razuvanov, and V. G. Sviridov, “Experimental investigations of heat transfer and temperature fields in models simulating fuel assemblies used in the core of a nuclear reactor with a liquid heavy-metal coolant,” Therm. Eng. 62, 645–651 (2015). https://doi.org/10.1134/S0040601515090025
R. Lyon, “Heat transfer coefficient in liquid metals,” Chem. Eng. Prog. 47, 75–81 (1951).
P. L. Kirillov, Heat Transfer of Liquid Metals in Circular Pipes (One- and Two-Phase Flows), Candidate’s Dissertation in Engineering (High Temperature Inst., USSR Akademy of Sciences, Moscow, 1968).
M. Kh. Ibragimov, V. I. Subbotin, and P. A. Ushakov, “Investigation of heat transfer in the turbulent flow of liquid metals in tubes,” At. Energiya 8, 48–50 (1961).
V. D. Talanov and P. A. Ushakov, “Heat transfer in circular, annular and square channels,” in Liquid Metals: Compilation, Ed. by P. L. Kirillov, V. I. Subbotin, and P. A. Ushakov (Atomizdat, Moscow, 1967), pp. 9–15.
V. I. Subbotin, P. A. Ushakov, and B. N. Gabrianovich, “Heat transfer in the flow of liquid metals,” Inzh. Fiz. Zh. 4 (4), 16–21 (1963).
B. S. Petukhov, L. G. Genin, S. A. Kovalev, S. L. Solov’ev, Heat Transfer in Nuclear Energy Units (Mosk. Energ. Inst., Moscow, 2003) [in Russian].
P. L. Kirillov, “Heat transfer in turbulent flow. Part 2. Velocity and temperature distributions,” At. Energy 122, 230–242 (2017).
V. M. Borishanskii, S. S. Kutateladze, I. I. Novikov, and O. S. Fedynskii, Liquid-Metal Coolants (Atomizdat, Moscow, 1976) [in Russian], pp. 124–125.
V. I. Subbotin, M. N. Ivanovskii, and Yu. I. Orlov, “Thermal contact resistance in the cooling of channels with liquid metals,” Teplofiz. Vys. Temp. 5, 1025–1031 (1967).
P. A. Ushakov, “Approximate thermal simulation of cylindrical fuel elements,” in Liquid Metals: Compilation, Ed. by V. I. Subbotin, P. L. Kirillov, and P. L. Ushakov (Atomizdat, Moscow, 1967), pp. 137–148 [in Russian].
V. I. Subbotin, M. Kh. Ibragimov, P. A. Ushakov, V. P. Bobkov, A. V. Zhukov, and Yu. S. Yur’ev, Hydrodynamics and Heat Transfer in Nuclear Power Generating Units (Basics of Calculation) (Atomizdat, Moscow, 1975) [in Russian].
P. A. Ushakov, A. V. Zhukov, and N. M. Matyukhin, “Heat transfer to liquid metals in regular arrays of fuel elements,” High Temp. 15, 868–873 (1977).
V. M. Borishanskii, M. A. Gotovskii, and E. V. Firsova, “Heat transfer to liquid metals in longitudinally wetted bundles of rods,” At. Energy 27, 1347–1350 (1969).
P. A. Ushakov, A. V. Zhukov, and N. M. Matyukhin, “Thermal fields of rod-type fuel elements situated in regular lattices streamlined by a heat carrier,” High Temp. 14, 482–488 (1976).
N. I. Buleev and R. Ya. Mironovich, “Heat Transfer in a turbulent liquid flow in a triangular grid of rods,” Teplofiz. Vys. Temp. 10, 1031–1038 (1972).
P. A. Ushakov, A. V. Zhukov, and N. M. Matyukhin, “Azimuthal temperature nonuniformity in a regular array of fuel elements for turbulent liquid metal flow,” High Temp. 15, 64–71 (1977).
A. V. Zhukov, A. P. Sorokin, and N. M. Matyukhin, Interchannel Transfer in Fuel Assemblies of Fast Reactors: Theoretical Fundamentals and Physics of the Process (Energoatomizdat, Moscow, 1989) [in Russian].
H. Takeda, T. Koga, and J. Kanno, “Study on similarity rule for natural convection water test of LMFBR,” in Evaluation of Decay Heat Removal by Natural Convection: Proc. Specialists Meeting of International Atomic Energy Agency, Japan, Feb. 22–23, 1993 (IAEA, Vienna, 1993), pp. 58–66.
P. A. Ushakov, A. P. Sorokin, and N. M. Matyukhin, “The role of hydraulic resistances in simulating natural convection in vessels of fast reactors using water,” Therm. Eng. 47, 383–389 (2000).
P. A. Ushakov and A. P. Sorokin, “Modeling problems of emergency natural convection heat removal in the upper plenum of LMR using water,” in Proc. 8th Int. Conf. on Nuclear Engineering (ICONE-8). USA, Baltimore, MD, Apr. 2–6, 2000 (ASME, New York, 2000), paper id. ICONE-8078.
F. Hofmann, C. Essing, S. Georgeours, and D. Tenchine, “Investigation on natural convection decay heat removal for the EFR status of program,” in Evaluation of Decay Heat Removal by Natural Convection: Proc. Specialists Meeting of International Atomic Energy Agency, Japan, Feb. 22–23, 1993 (IAEA, Vienna, 1993), pp. 1–25.
A. N. Opanasenko, A. P. Sorokin, D. G. Zaryugin, and A. A. Trufanov, “Fast reactor: An experimental study of thermohydraulic processes in different operating regimes,” Therm. Eng. 64, 336–344 (2017). https://doi.org/10.1134/S0040601517050056
A. N. Opanasenko, A. P. Sorokin, A. A. Trufanov, N. A. Denisova, E. V. Sviridov, N. G. Razuvanov, V. G. Zagorskii, and I. A. Belyaev, “Experimental studies of coolant temperature and velocity on an integrated water model of a fast reactor in different operating regimes,” At. Energy 123, 25–33 (2017).
H. Schulz, “Experience with thermal fatigue in LWR piping caused by mixing and stratification. Historical perspective,” in Proc. Specialists Meeting on Experience with Thermal Fatigue in LWR Piping Caused by Mixing and Stratification, Paris, France, Jun. 8–10, 1998 (Organisation for Economic Co-operation and Development, Paris, 1998), pp. 13–18.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by V. Filatov
Rights and permissions
About this article
Cite this article
Sorokin, A.P., Kuzina, Y.A. Physical Modeling of Hydrodynamic and Heat Transfer Processes in Liquid-Metal Cooled Nuclear Power Facilities. Therm. Eng. 66, 533–542 (2019). https://doi.org/10.1134/S0040601519080093
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0040601519080093