Abstract—To determine a crack growth direction, we propose to take into account constant T-stresses and the higher-order terms in the expansion of the stress field at a crack tip by representing them as a function of the angular distribution of T-stresses. A modified criterion is suggested for determining a crack growth direction using the maximum tangential stresses with allowance for the angular distribution of T-stresses at a crack tip.
Similar content being viewed by others
REFERENCES
A. M. Bol’shakov and L. N. Tatarinov, “Reliability of gas main after operation for 30 years under extreme north conditions,” Gazov. Prom., No. 2, 28–31 (2009).
A. V. Lyglaev, S. P. Fedorov, A. I. Levin, A. M. Bol’shakov, and S. I. Alekseeva, “Cold resistance and strength of large thin-walled construction members,” Zavod. Lab. 64 (5), 52–55 (1998).
A. A. Gilyazov, A. M. Bol’shakov, N. I. Golikov, N. I. Ivanov, S. S. Sintsov, R. P. Tikhonov, A. A. Alekseev, and L. N. Tatarinov, “Carrying capacity of aging gas mains under extreme north conditions,” Gazov. Prom., No. 1, 38–39 (2006).
A. V. Lyglaev, A. I. Levin, I. A. Kornev, M. K. Cheremkin, and A. M. Bol’shakov, “Operation of main pipes under north conditions,” Gazov. Prom., No. 8, 37–40 (2001).
G. R. Irwin, “Fracture,” in Handbuch der Physik (1958), Vol. V, VI, pp. 551–590.
B. Cotterell, “Notes on paths and stability of cracks,” Int. J. Fract. Mechan. 3 (2), 526–533 (1966).
Yu. G. Matvienko, “Nonsingular T-stresses in the criteria of the fracture mechanics of notched bodies,” Vestn. Nizhegorod. Univ, No. 4, 5, 2651–2652 (2011).
Yu. G. Matvienko, “Nonsingular T-stresses in the problems of two-parameter fracture mechanics,” Zavod. Lab., No. 2, 51–58 (2012).
Yu. G. Matvienko, M. A. Bubnov, and G. I. Nesterenko, “Averaging of stresses in searching for a crack trajectory,” Vestn. Nauchno-Tekhn. Razvit. 52 (12), 19–24 (2011).
T. L. Becker, R. M. Cannon, and R. O. Ritchie, “Finite crack kinking and T-stresses in functionally graded materials,” Int. J. Solids Struct. 38, 5545–5563 (2001).
C. S. Chen, P. A. Wawrzynek, and A. R. Ingraffea, “Prediction of residual strength and curvilinear crack growth in aircraft fuselages,” AIAA J. 40 (8), 1644–1652 (2002).
Yu. G. Matvienko and R. A. Pochinkov, “Influence of nonsingular T-stress components on the plastic deformation zones at the tip of a mode I crack,” Deform. Razrushenie Mater., No. 3, 6–14 (2012).
A. M. Bol’shakov and L. A. Prokop’ev, “Influence of a stress distribution on the plasticity zone at the tip of a mode I crack with allowance for T-stresses,” Deform. Razrushenie Mater., No. 7, 11–14 (2016).
C. F. Shih, “Small-scale yielding analysis of mixed plane strain crack problem,” Fract. Analysis 560, 187–210 (1974).
Yu. Ito and Yu. Murakami, Handbook of Stress Intensity Factors, Ed. by Yu. Murakami (Mir, Moscow, 1990).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Shakhlevich
Rights and permissions
About this article
Cite this article
Bol’shakov, A.M., Prokop’ev, L.A. Prediction of a Crack Growth Trajectory with Allowance for the Angular Distribution of the Small Components of the Tangential Stresses at a Crack Tip. Russ. Metall. 2019, 964–966 (2019). https://doi.org/10.1134/S0036029519100033
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029519100033