Diamond milling of metal mirrors with optical surface quality

Christof Iserlohe; Andreas Eckart; Christian Straubmeier; Damian Moratschke; Bernhard Brandl

doi:10.1117/12.925168

13 September 2012 Diamond milling of metal mirrors with optical surface quality

Christof Iserlohe, Andreas Eckart, Christian Straubmeier, Damian Moratschke, Bernhard Brandl

Proceedings Volume 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II; 84504V (2012) https://doi.org/10.1117/12.925168
Event: SPIE Astronomical Telescopes + Instrumentation, 2012, Amsterdam, Netherlands

Abstract

Optical and opto-mechanical components in astronomical instruments are amongst the most expensive and delicate single parts. Lenses made of special glasses or crystals are sometimes difficult to obtain (if at all), especially with larger diameters and are figured and polished involving time-consuming and even risky procedures. At infrared wavelengths (< 5μm), when the instrument is cooled to temperatures even below that of liquid nitrogen, mechanical stress is induced between e.g. a glass lens and its metal mounting due to different heat expansion coefficients of the materials involved. This can considerably degrade the performance of the whole instrument. At infrared wavelengths the optical specifications considering surface roughness and form error are less tight than in the optical due to the longer wavelengths involved. Hence metal mirrors with a surface roughness and a form error of around 50 nm (RMS) may generally be favoured due to lower production costs then lenses. Goal of the project described here is to manufacture plane, spherical or aspherical aluminum mirrors, which are not hampered in the ways described above, in a cost effective procedure with optical specifications (surface roughness and form error) of less than 100 nm (RMS) by means of direct diamond milling.

Citation Download Citation

Christof Iserlohe, Andreas Eckart, Christian Straubmeier, Damian Moratschke, and Bernhard Brandl "Diamond milling of metal mirrors with optical surface quality", Proc. SPIE 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II, 84504V (13 September 2012); https://doi.org/10.1117/12.925168

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available