Paper
12 September 2006 Spectral and luminous efficacy change of high-power LEDs under different dimming methods
Yimin Gu, Nadarajah Narendran, Tianming Dong, Huiying Wu
Author Affiliations +
Abstract
Dimming is an important and necessary feature for light sources used in general lighting applications. An experimental study was conducted to quantify the spectral and luminous efficacy change of high-power colored and pc-white LEDs under continuous current reduction (CCR) and pulse-width modulation (PWM) dimming schemes. For InGaN-based blue, green, and pc-white LEDs, the peak wavelength shifts were in opposite directions for the two dimming schemes. The peak wavelength showed a blue shift with increased current, most likely due to band filling and QCSE dominated effects. InGaN LEDs exhibited red shifts with increased duty cycle, which is dominated by junction heat. AlInGaP red LEDs show mainly thermal-induced red shift with increased current or duty cycle. In addition, the luminous efficacy was always higher for the CCR dimming scheme at dimmed levels, irrespective of the LED type. Keywords: Light-emitting diodes (LEDs), white LEDs, mixed-color white LEDs, pulse-width modulation (PWM), continuous current reduction (CCR), peak wavelength shift, luminous efficacy
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yimin Gu, Nadarajah Narendran, Tianming Dong, and Huiying Wu "Spectral and luminous efficacy change of high-power LEDs under different dimming methods", Proc. SPIE 6337, Sixth International Conference on Solid State Lighting, 63370J (12 September 2006); https://doi.org/10.1117/12.680531
Lens.org Logo
CITATIONS
Cited by 81 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Luminous efficacy

Manufacturing

Green light emitting diodes

Indium gallium nitride

Temperature metrology

Light sources

RELATED CONTENT

Using high-power LEDs in harsh environments
Proceedings of SPIE (May 31 2013)
LED luminaire longevity strategy models comparison
Proceedings of SPIE (August 18 2010)
Evaluation of light-emitting diodes for signage applications
Proceedings of SPIE (January 26 2004)
Binary complementary white LED illumination
Proceedings of SPIE (December 05 2001)
Color temperature tunable white light LED system
Proceedings of SPIE (September 12 2006)

Back to Top