Paper
10 November 2022 Rotating speed influence on internal flow characteristics of electric submersible pump
Author Affiliations +
Proceedings Volume 12301, 6th International Conference on Mechatronics and Intelligent Robotics (ICMIR2022); 123010R (2022) https://doi.org/10.1117/12.2644481
Event: 6th International Conference on Mechatronics and Intelligent Robotics, 2022, Kunming, China
Abstract
In order to study rotating speed influence on internal flow characteristics of ESP (electric submersible pump), the electric submersible pump under different rotating speed schemes are simulated. The results of the simulation show that the gas is unevenly distributed in the blade passage and mainly concentrated on the inlet side of the passage near the front cover plate as the impeller rotates. In the blade passage, the gas phase shows periodic aggregation and diffusion. When the impeller rotating speed increases, the cycle of periodic accumulation is shortened. In the meanwhile, diffusion of gas phase in the blade passage is shortened. With the gas phase concentration in the impeller decreases, the overall flow velocity in the blade passage, the inlet pressure difference, outlet pressure difference increase. With the impeller rotating speed increases, the pressure difference between two sides of blade and the fluctuation frequency of blade surface load increase gradually like it.
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bin Yao, Shuang Zhang, Qichen Liu, Mengyao Xu, and Ziming Feng "Rotating speed influence on internal flow characteristics of electric submersible pump", Proc. SPIE 12301, 6th International Conference on Mechatronics and Intelligent Robotics (ICMIR2022), 123010R (10 November 2022); https://doi.org/10.1117/12.2644481
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffusion

Liquids

Head

Numerical simulations

3D modeling

Frequency conversion

Mathematical modeling

Back to Top