Estimation of signal and noise for a whole-body photon counting research CT system

Zhoubo Li; Shuai Leng; Zhicong Yu; Steffen Kappler; Cynthia H. McCollough

doi:10.1117/12.2216637

25 March 2016 Estimation of signal and noise for a whole-body photon counting research CT system

Zhoubo Li, Shuai Leng, Zhicong Yu, Steffen Kappler, Cynthia H. McCollough

Proceedings Volume 9783, Medical Imaging 2016: Physics of Medical Imaging; 97831F (2016) https://doi.org/10.1117/12.2216637
Event: SPIE Medical Imaging, 2016, San Diego, California, United States

Abstract

Photon-counting CT (PCCT) may yield potential value for many clinical applications due to its relative immunity to electronic noise, increased geometric efficiency relative to current scintillating detectors, and the ability to resolve energy information about the detected photons. However, there are a large number of parameters that require optimization, particularly the energy thresholds configuration. Fast and accurate estimation of signal and noise in PCCT can benefit the optimization of acquisition parameters for specific diagnostic tasks. Based on the acquisition parameters and detector response of our research PCCT system, we derived mathematical models for both signal and noise. The signal model took the tube spectrum, beam filtration, object attenuation, water beam hardening, and detector response into account. The noise model considered the relationship between noise and radiation dose, as well as the propagation of noise as threshold data are subtracted to yield energy bin data. To determine the absolute noise value, a noise look-up table (LUT) was acquired using a limited number of calibration scans. The noise estimation algorithm then used the noise LUT to estimate noise for scans with a variety of combination of energy thresholds, dose levels, and object attenuation. Validation of the estimation algorithms was performed on our whole-body research PCCT system using semianthropomorphic water phantoms and solutions of calcium and iodine. The algorithms achieved accurate estimation of signal and noise for a variety of scanning parameter combinations. The proposed method can be used to optimize energy thresholds configuration for many clinical applications of PCCT.

Citation Download Citation

Zhoubo Li, Shuai Leng, Zhicong Yu, Steffen Kappler, and Cynthia H. McCollough "Estimation of signal and noise for a whole-body photon counting research CT system", Proc. SPIE 9783, Medical Imaging 2016: Physics of Medical Imaging, 97831F (25 March 2016); https://doi.org/10.1117/12.2216637

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available