To read this content please select one of the options below:

Analysis and application of shroud wall optimization to an axial compressor with upstream boundary layer to improve aerodynamic performance

Hanan Lu (National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics, School of Energy and Power Engineering, Beihang University, Beijing, China)
Qiushi Li (National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics, School of Energy and Power Engineering, Beihang University, Beijing, China)
Tianyu Pan (National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics, School of Energy and Power Engineering, Beihang University, Beijing, China)
Ramesh Agarwal (Department of Mechanical Engineering and Materials Science, Washington University in Saint Louis, Saint Louis, Missouri, USA)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 13 June 2019

Issue publication date: 17 October 2019

241

Abstract

Purpose

For an axial-flow compressor rotor, the upstream inflow conditions will vary as the aircraft faces harsh flight conditions (such as taking off, landing or maneuvering) or the whole compressor operates at off-design conditions. With the increase of upstream boundary layer thickness, the rotor blade tip will be loaded and the increased blade load will deteriorate the shock/boundary layer interaction and tip leakage flows, resulting in high aerodynamic losses in the tip region. The purpose of this paper is to achieve a better flow control for tip secondary flows and provide a probable design strategy for high-load compressors to tolerate complex upstream inflow conditions.

Design/methodology/approach

This paper presents an analysis and application of shroud wall optimization to a typical transonic axial-flow compressor rotor by considering the inlet boundary layer (IBL). The design variables are selected to shape the shroud wall profile at the tip region with the purpose of controlling the tip leakage loss and the shock/boundary layer interaction loss. The objectives are to improve the compressor efficiency at the inlet-boundary-layer condition while keeping its aerodynamic performance at the uniform condition.

Findings

After the optimization of shroud wall contour, aerodynamic benefits are achieved mainly on two aspects. On the one hand, the shroud wall optimization has reduced the intensity of the tip leakage flow and the interaction between the leakage and main flows, thereby decreasing the leakage loss. On the other hand, the optimized shroud design changes the shock structure and redistributes the shock intensity in the spanwise direction, especially weakening the shock near the tip. In this situation, the shock/boundary layer interaction and the associated flow separations and wakes are also eliminated. On the whole, at the inlet-boundary-layer condition, the compressor with optimized shroud design has achieved a 0.8 per cent improvement of peak efficiency over that with baseline shroud design without sacrificing the total pressure ratio. Moreover, the re-designed compressor also maintains the aerodynamic performance at the uniform condition. The results indicate that the shroud wall profile has significant influences on the rotor tip losses and could be properly designed to enhance the compressor aerodynamic performance against the negative impacts of the IBL.

Originality/value

The originality of this paper lies in developing a shroud wall contour optimization design strategy to control the tip leakage loss and the shock/boundary layer interaction loss in a transonic compressor rotor. The obtained results could be beneficial for transonic compressors to tolerate the complex upstream inflow conditions.

Keywords

Acknowledgements

The authors would like to acknowledge the support from the National Natural Science Foundation of China (Nos 51636001 and 51706008), China Postdoctoral Science Foundation (No. 2018M641150), and Aeronautics Power Foundation (No. 6141B090315). The support and resources provided by the Washington University in St. Louis during the stay of the first author as a research scholar in the USA are also gratefully acknowledged.

Citation

Lu, H., Li, Q., Pan, T. and Agarwal, R. (2019), "Analysis and application of shroud wall optimization to an axial compressor with upstream boundary layer to improve aerodynamic performance", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 29 No. 11, pp. 4237-4261. https://doi.org/10.1108/HFF-01-2019-0071

Publisher

:

Emerald Publishing Limited

Copyright © 2019, Emerald Publishing Limited

Related articles