Simple geometric model to describe self-folding of polymer sheets

Ying Liu, Russell Mailen, Yong Zhu, Michael D. Dickey, and Jan Genzer
Phys. Rev. E 89, 042601 – Published 10 April 2014
PDFHTMLExport Citation

Abstract

Self-folding is the autonomous folding of two-dimensional shapes into three-dimensional forms in response to an external stimulus. This paper focuses on light-induced self-folding of prestrained polymer sheets patterned with black ink. The ink absorbs the light and the resulting heat induces the polymer beneath the ink to relax faster than the rest of the sheet. A simple geometric model captures both the folding angle and folding kinetics associated with this localized shrinkage. The model assumes that (1) the polymer in contact with the ink shrinks at a rate determined by the temporal temperature profile of the hinge surface; (2) the bottom of the sheet, which is cooler, does not shrink considerably; and (3) a linear gradient of strain relaxation exists across the film between these two extremes. Although there are more complex approaches for modeling folding, the appeal of this model is its simplicity and ease of use. Measurements of the macroscopic, thermally driven shrinkage behavior of the sheets help predict the kinetics of folding by determining how fast the top of the hinge shrinks as a function of temperature and time. These measurements also provide information about the temperature required to induce folding and offer indirect measurement of the glass transition temperature of the polymer that comprises the sheet.

  • Figure
  • Figure
  • Figure
  • Figure
  • Figure
  • Figure
  • Figure
1 More
  • Received 22 December 2013

DOI:https://doi.org/10.1103/PhysRevE.89.042601

©2014 American Physical Society

Authors & Affiliations

Ying Liu1, Russell Mailen2, Yong Zhu2, Michael D. Dickey1,*, and Jan Genzer1,†

  • 1Department of Chemical & Biomolecular Engineering, North Carolina State University, 911 Partners Way, Raleigh, North Carolina 27695, USA
  • 2Department of Mechanical & Aerospace Engineering, North Carolina State University, 911 Oval Drive, Raleigh, North Carolina 27695, USA

  • *Corresponding author: mddickey@ncsu.edu
  • Corresponding author: jan_genzer@ncsu.edu

Article Text (Subscription Required)

Click to Expand

Supplemental Material (Subscription Required)

Click to Expand

References (Subscription Required)

Click to Expand
Issue

Vol. 89, Iss. 4 — April 2014

Reuse & Permissions
Access Options
Author publication services for translation and copyediting assistance advertisement

Authorization Required


×
×

Images

×

Sign up to receive regular email alerts from Physical Review E

Log In

Cancel
×

Search


Article Lookup

Paste a citation or DOI

Enter a citation
×