Treatment and utilization of artificial aggregate in the production of cement composites

The aim of the work is to find a suitable way of treatment of steel ladle slag for subsequent use as a partial replacement of the binder component in cement composites. The goal is based on the raw materials policy of the Czech Republic. Within this work is solved the issue of possible use of steel slag as the largest by-product of steel production. The work is focused on a specific ladle slag from ladle furnaces, by which are equipped the modern steel plants. Ladle slag is similar in chemical composition to Portland cement. However, its mineralogical composition should be taken into account in relation to its expansion reactions and lower hydraulic activity. One of the goals is the research of effect of particle size in cement-slag mixtures. The slag was ground for research on two different specific surfaces - coarsely in a vibrating mill and finely in a ball mill. The research within the experimental part of the work verified the positive influence of ladle slag on the properties of fresh and hardened mortar mixtures. Tensile bending strengths and compressive strengths are for some mixtures with ladle slag even higher than the strengths of the reference mixtures.