Paper • The following article is Open access

Design and Fabrication of Wolter-type 4-mirror system

, and

Published under licence by IOP Publishing Ltd
, , Citation N Watanabe et al 2017 J. Phys.: Conf. Ser. 849 012058 DOI 10.1088/1742-6596/849/1/012058

Download Article PDF

Article metrics

248 Total downloads

Share this article

Author e-mails

watanabe@bk.tsukuba.ac.jp

Author affiliations

1 Faculty of Pure and Applied Sciences, University of Tsukuba, Tsukuba, Ibaraki, 305-8573, Japan

2 CROSS (Comprehensive Research Organization for Science and Society), 1601 Kamitakatsu, Tsuchiura, Ibaraki, 300-0811, Japan

Buy this article in print

Journal RSS
Sign up for new issue notifications
1742-6596/849/1/012058

Abstract

A Wolter-type 4-mirror system was designed and evaluated by ray-trace calculation. The design and fabrication process were developed. The master mandrel of oxygen-free copper was shaped by diamond turning. The Pyrex glass replica was made by a vacuum replication technique. A visible light image of a metal mesh could be obtained using this replica mirror.

Export citation and abstract BibTeX RIS

Previous article in issue
Next article in issue

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Please wait… references are loading.
10.1088/1742-6596/849/1/012058