Issue 39, 2021

One-step hydrothermal synthesis of porous Ti3C2Tz MXene/rGO gels for supercapacitor applications

Abstract

Titanium carbide/reduced graphene oxide (Ti3C2Tz/rGO) gels were prepared by a one-step hydrothermal process. The gels show a highly porous structure with a surface area of ∼224 m2 g−1 and average pore diameter of ∼3.6 nm. The content of GO and Ti3C2Tz nanosheets in the reaction precursor was varied to yield different microstructures. The supercapacitor performance of Ti3C2Tz/rGO gels varied significantly with composition. Specific capacitance initially increased with increasing Ti3C2Tz content, but at high Ti3C2Tz content gels cannot be formed. Also, the retention of capacitance decreased with increasing Ti3C2Tz content. Ti3C2Tz/rGO gel electrodes exhibit enhanced supercapacitor properties with high potential window (1.5 V) and large specific capacitance (920 F g−1) in comparison to pure rGO and Ti3C2Tz. The synergistic effect of EDLC from rGO and redox capacitance from Ti3C2Tz was the reason for the enhanced supercapacitor performance. A symmetric two-electrode supercapacitor cell was constructed with Ti3C2Tz/rGO, which showed very high areal capacitance (158 mF cm−2), large energy density (∼31.5 μW h cm−2 corresponding to a power density of ∼370 μW cm−2), and long stability (∼93% retention) after 10 000 cycles.

Graphical abstract: One-step hydrothermal synthesis of porous Ti3C2Tz MXene/rGO gels for supercapacitor applications

Supplementary files

Article information

Article type
Paper
Submitted
05 Apr 2021
Accepted
06 Sep 2021
First published
07 Sep 2021

Nanoscale, 2021,13, 16543-16553

Author version available

One-step hydrothermal synthesis of porous Ti3C2Tz MXene/rGO gels for supercapacitor applications

S. Saha, K. Arole, M. Radovic, J. L. Lutkenhaus and M. J. Green, Nanoscale, 2021, 13, 16543 DOI: 10.1039/D1NR02114A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements