Issue 15, 2021

Fabrication of high-performance symmetrical coin cell supercapacitors by using one step and green synthesis sulfur doped graphene powders

Abstract

In this work, symmetrical supercapacitors in the form of coin cell types were produced by using S-doped graphene powders. Sulfur doped graphene powders were prepared by cyclic voltammetry in different potential ranges for selective modification of powders by functional groups. S-Doped graphene powders were also characterized by spectroscopic, microscopic, and electrochemical methods. The formation of graphene layers was supported by scanning electron microscopic and Raman spectroscopic analyses. Functional groups formed on the graphene surface were identified by X-ray photoelectron spectroscopy. The electrodes formed with compositions consisting of binding material at 5%, conductive material at 5% and S-doped graphene powder at 90% were used in cyclic charge–discharge tests of the supercapacitors to determine the specific capacitance of them. The highest specific capacitance of the supercapacitors was determined as 176 F/g−1, with a capacity loss of 5% at the end of 1000 cycles in A-SG3M.

Graphical abstract: Fabrication of high-performance symmetrical coin cell supercapacitors by using one step and green synthesis sulfur doped graphene powders

Supplementary files

Article information

Article type
Paper
Submitted
15 Dec 2020
Accepted
02 Mar 2021
First published
23 Mar 2021

New J. Chem., 2021,45, 6928-6939

Fabrication of high-performance symmetrical coin cell supercapacitors by using one step and green synthesis sulfur doped graphene powders

M. B. Arvas, N. Karatepe, M. Gencten and Y. Sahin, New J. Chem., 2021, 45, 6928 DOI: 10.1039/D0NJ06061E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements