Issue 34, 2017, Issue in Progress

Fabrication of BN membranes containing high density of cylindrical pores using an elegant approach

Abstract

A high quality BN membrane with millions of through cylindrical pores is simply fabricated using a double inversion approach combining atomic layer deposition and polymer-derived ceramic route. Well crystallized hexagonal boron nitride walls are obtained at relatively low temperature (1000 °C). This new membrane is a promising candidate for osmotic energy conversion and water filtration applications.

Graphical abstract: Fabrication of BN membranes containing high density of cylindrical pores using an elegant approach

Supplementary files

Article information

Article type
Paper
Submitted
03 Apr 2017
Accepted
04 Apr 2017
First published
10 Apr 2017
This article is Open Access
Creative Commons BY license

RSC Adv., 2017,7, 20709-20715

Fabrication of BN membranes containing high density of cylindrical pores using an elegant approach

C. Marichy, V. Salles, X. Jaurand, A. Etiemble, T. Douillard, J. Faugier-Tovar, F. Cauwet and A. Brioude, RSC Adv., 2017, 7, 20709 DOI: 10.1039/C7RA03808A

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements