Issue 9, 2017, Issue in Progress

The influence of process parameters on needle punched nonwovens investigated using image analysis

Abstract

The influence of process parameters including punch frequency, needle penetration depth and punch times on the fiber distribution and straight segment fiber length of needle punched nonwovens was investigated using the Hough transform method. The results show that punch frequency and punch times have more significant influence on the samples than needle penetration depth. When combining the experimental results with image analysis, the optimum process parameters to prepare needle punched nonwovens based on preoxidized polyacrylonitrile were obtained.

Graphical abstract: The influence of process parameters on needle punched nonwovens investigated using image analysis

Article information

Article type
Paper
Submitted
19 Oct 2016
Accepted
05 Dec 2016
First published
17 Jan 2017
This article is Open Access
Creative Commons BY license

RSC Adv., 2017,7, 5183-5188

The influence of process parameters on needle punched nonwovens investigated using image analysis

B. Yu, X. Zhao, Y. Zeng and D. Qi, RSC Adv., 2017, 7, 5183 DOI: 10.1039/C6RA25474H

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements