Issue 110, 2015

Capacity of thiourea Schiff base esters as multifunctional additives: synthesis, characterization and performance evaluation in polyol

Abstract

A novel thiourea Schiff base ester TSBE was synthesized following a two step reaction. At first, thiourea and salicylaldehyde were reacted in ethanol to obtain thiourea Schiff base TSB. In the second step, esterification of TSB was done with lauroyl chloride catalyzed by 4-(dimethylamino)pyridine (DMAP) in N,N-dimethylacetamide (DMAc) solvent to obtain the final product TSBE. The synthesized compounds were characterized using CHN analysis, FT-IR and NMR. The antioxidant properties of this additive were assessed via the universal oxidation test (IP-306) and rotary bomb oxidation test (ASTM D2272) while antifriction and antiwear properties were evaluated in terms of the average friction coefficient and average wear scar diameter respectively by doing the four ball test (ASTM D4172). Studies revealed that TSBE had good antioxidant properties. Tests carried out by a four ball test machine indicated that the additive TSBE could reduce the friction to 45.6% and wear to ∼20% when compared with the pure polyol base oil.

Graphical abstract: Capacity of thiourea Schiff base esters as multifunctional additives: synthesis, characterization and performance evaluation in polyol

Article information

Article type
Paper
Submitted
10 Jul 2015
Accepted
16 Oct 2015
First published
16 Oct 2015

RSC Adv., 2015,5, 90367-90373

Capacity of thiourea Schiff base esters as multifunctional additives: synthesis, characterization and performance evaluation in polyol

R. K. Singh, A. Kukrety, O. P. Sharma, G. D. Thakre, N. Atray and S. S. Ray, RSC Adv., 2015, 5, 90367 DOI: 10.1039/C5RA13507A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements