Issue 13, 2015

A fully integrated microdevice for biobarcode assay based biological agent detection

Abstract

An integrated microdevice, consisting of a micropump, a passive mixer, a magnetic separation chamber, and a microcapillary electrophoretic channel, was constructed for biobarcode assay based multiplex biological agent detection in a sample-to-answer-out manner within 30 min with high sensitivity.

Graphical abstract: A fully integrated microdevice for biobarcode assay based biological agent detection

Supplementary files

Article information

Article type
Communication
Submitted
25 Mar 2015
Accepted
18 May 2015
First published
18 May 2015
This article is Open Access
Creative Commons BY-NC license

Lab Chip, 2015,15, 2744-2748

A fully integrated microdevice for biobarcode assay based biological agent detection

M. Cho, S. Chung, Y. T. Kim, J. H. Jung, D. H. Kim and T. S. Seo, Lab Chip, 2015, 15, 2744 DOI: 10.1039/C5LC00355E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements