SCHEDULED MAINTENANCE
Dual-doping to suppress cracking in spinel LiMn2O4: a joint theoretical and experimental study
Abstract
Electrochemical cycling stabilities were compared for undoped and Al/Co dual-doped spinel LiMn2O4 synthesized by solid state reactions. We observed the suppression of particle fracture in Al/Co dual-doped LiMn2O4 during charge/discharge cycling and its distinguishable particle morphology with respect to the undoped material. Systematic first-principles calculations were performed on undoped, Al or Co single-doped, and Al/Co dual-doped LiMn2O4 to investigate their structural differences at the atomistic level. We reveal that while Jahn–Teller distortion associated with the Mn3+O6 octahedron is the origin of the lattice strain, the networking — i.e. the distribution of mixed valence Mn ions — is much more important to release the lattice strain, and thus to alleviating particle cracking. The calculations showed that the lattice mismatching between Li+ intercalation and deintercalation of LiMn2O4 can be significantly reduced by dual-doping, and therefore also the volumetric shrinkage during delithiation. This may account for the near disappearance of cracks on the surface of Al/Co–LiMn2O4 after 350 cycles, while some obvious cracks have developed in undoped LiMn2O4 at similar particle size even after 50 cycles. Correspondingly, Al/Co dual-doped LiMn2O4 showed a good cycling stability with a capacity retention of 84.1% after 350 cycles at a rate of 1C, 8% higher than the undoped phase.
Please wait while we load your content...
