Issue 16, 2015

High energy density titanium doped-vanadium oxide-vertically aligned CNT composite electrodes for supercapacitor applications

Abstract

In this study, we provide the first report on the supercapacitance behavior of titanium doped vanadium oxide films grown on vertically aligned carbon nanotubes using a chemical vapor deposition (CVD) technique. The capacitance of CVD derived titanium doped vanadium oxide–carbon nanotube composites was measured at different scan rates to evaluate the charge storage behavior. In addition, the electrochemical characteristics of the titanium doped vanadium oxide thin films synthesized by the CVD process were compared to substantiate the propitious effect of the carbon nanotubes on the capacitance of the doped vanadium oxide. Considering the overall materials loading with good rate capability and excellent charge retention up to 400 cycles, it can be noted that attractive capacitance values as high as 310 F g−1 were reported. Ab initio theoretical studies, demonstrating the substantial improvement in the electronic conductivity of the vanadium oxide due to titanium doping and oxygen vacancies, have also been included corroborating the attractive experimental capacitance response.

Graphical abstract: High energy density titanium doped-vanadium oxide-vertically aligned CNT composite electrodes for supercapacitor applications

Article information

Article type
Paper
Submitted
10 Dec 2014
Accepted
17 Feb 2015
First published
17 Feb 2015

J. Mater. Chem. A, 2015,3, 8413-8432

Author version available

High energy density titanium doped-vanadium oxide-vertically aligned CNT composite electrodes for supercapacitor applications

P. H. Jampani, O. Velikokhatnyi, K. Kadakia, D. H. Hong, S. S. Damle, J. A. Poston, A. Manivannan and P. N. Kumta, J. Mater. Chem. A, 2015, 3, 8413 DOI: 10.1039/C4TA06777K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements