Issue 4, 2015

Nonvolatile optically-erased colloidal memristors

Abstract

A nonconjugated methacrylate terpolymer containing carbazole moieties (electron donors), 1,3,4-oxadiazole moieties (electron acceptors), and Coumarin-6 in the pendant groups was synthesized via free radical copolymerization of methacrylate monomers containing the respective functional groups. The terpolymer was formed into 57 nm particles through a mini-emulsion route. For a thin 100 nm film of the fused particles sandwiched between an indium-tin oxide (ITO) electrode and an Al electrode, the structure behaved as a nonvolatile flash (rewritable) memory with accessible electronic states that could be written, read, and optically erased. The device exhibited a turn-on voltage of ca. −4.5 VDC and a 106 current ratio. A device in the ON high conductance state could be reverted to the OFF state with a short exposure to a 360 nm light source. The development of semiconducting colloidal inks that can be converted into electroactive devices through a continuous processing method is a critical step in the widespread adoption of these 2D manufacturing technologies for printed electronics.

Graphical abstract: Nonvolatile optically-erased colloidal memristors

Article information

Article type
Communication
Submitted
05 Sep 2014
Accepted
08 Oct 2014
First published
10 Oct 2014

Nanoscale, 2015,7, 1270-1279

Author version available

Nonvolatile optically-erased colloidal memristors

C. F. Huebner, V. Tsyalkovsky, Y. Bandera, M. K. Burdette, J. A. Shetzline, C. Tonkin, S. E. Creager and S. H. Foulger, Nanoscale, 2015, 7, 1270 DOI: 10.1039/C4NR05167J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements