Issue 6, 2015

How polymer additives reduce the pour point of hydrocarbon solvents containing wax crystals

Abstract

We have investigated how four different pour point depressant (PPD) polymers affect the pour point transition in mixtures of a single pure wax in a solvent. We used either n-eicosane (C20), CH3(CH2)18CH3, n-tetracosane (C24), CH3(CH2)22CH3 or n-hexatriacontane (C36), CH3(CH2)34CH3 as the wax component with either n-heptane or toluene as the solvent component. For all wax–solvent combinations, the measured variation of wax solubility with temperature is well predicted by ideal solution theory. The variation of pour point temperature as a function of the overall wax concentration is quantitatively modelled using the idea that, for each overall wax concentration, the pour point occurs at a temperature at which a critical volume fraction ϕ* of wax crystals has precipitated. Close to the pour point temperature, extraction and examination of the wax crystals show they consist of polydisperse, irregularly-shaped platelets with axial ratios (h/d, where h is the plate thickness and d is the plate long dimension) in the range 0.005–0.05. It is found that the measured ϕ* values corresponding to the pour point transitions are weakly correlated with the wax crystal axial ratios (h/d) for all wax–solvent–PPD polymer combinations. These results indicate that the pour point transition occurs at a volume fraction larger than the value at which the volumes of rotation of the platelet crystals overlap, i.e., 2.5(h/d) < ϕ* < 11(h/d). PPD polymers work, in part, by increasing the wax crystal axial ratio (h/d), thereby increasing ϕ* and reducing the pour point temperature. Since the PPD's ability to modify the wax crystal shape relies on its adsorption to the crystal-solution surface, it is anticipated and observed experimentally that optimum PPD efficacy is correlated with the difference between the wax and the polymer solubility boundary temperatures. This finding and the mechanistic insight gained here provide the basis for a simple and rapid screening test to identify candidate species likely to be effective PPDs for particular wax systems.

Graphical abstract: How polymer additives reduce the pour point of hydrocarbon solvents containing wax crystals

Supplementary files

Article information

Article type
Paper
Submitted
25 Sep 2014
Accepted
02 Jan 2015
First published
07 Jan 2015

Phys. Chem. Chem. Phys., 2015,17, 4107-4117

Author version available

How polymer additives reduce the pour point of hydrocarbon solvents containing wax crystals

B. P. Binks, P. D. I. Fletcher, N. A. Roberts, J. Dunkerley, H. Greenfield, A. Mastrangelo and K. Trickett, Phys. Chem. Chem. Phys., 2015, 17, 4107 DOI: 10.1039/C4CP04329D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements