Issue 2, 2003

In situ fabricated porous filters for microsystems

Abstract

Porous filters were fabricated inside a microchannel using emulsion photo-polymerization. The porosity of the filter is dependent on the composition of the pre-polymer mixture. The morphology and flow resistance of four filters with varying water and cross-linker concentrations was studied. The porous filter was used to separate samples, such as whole blood to cell/serum components, based on size. The efficiency of cell/serum separation by the porous filter was tested by performing a glucose-6-phosphate dehydrogenase assay and was found to be comparable to separation by centrifuge. The porous filter thus mimics the functionality of the centrifuge, with the added benefits of no power requirements and ability to handle small sample volumes.

Article information

Article type
Paper
Submitted
14 Jan 2003
Accepted
08 Apr 2003
First published
30 Apr 2003

Lab Chip, 2003,3, 62-66

In situ fabricated porous filters for microsystems

J. Moorthy and D. J. Beebe, Lab Chip, 2003, 3, 62 DOI: 10.1039/B300450C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements