Issue 7, 2022, Issue in Progress

Structure and properties of chitosan/sodium dodecyl sulfate composite films

Abstract

In this study, we investigated the effect of sodium dodecyl sulfate (SDS) content on the structure and properties of chitosan films. It is found that the binding of SDS to chitosan was realized through the interactions between –SO4 and –NH3+, forming an ionically cross-linked film. Structural analysis revealed that the crystallization was greatly hindered by introducing SDS. With an increase of SDS content, the glass transition temperatures (Tg) of chitosan films increased due to the formation of crosslinks. Compared to pure chitosan film, the composite films had lower content of moisture and possessed better thermal stability. In addition, the mechanical properties of the as-obtained composite films were closely related to the content of SDS, and were significantly improved in the biopolymer films with moderate SDS content. These results indicate that the microstructure as well as properties of the chitosan films can be regulated by adding SDS.

Graphical abstract: Structure and properties of chitosan/sodium dodecyl sulfate composite films

Supplementary files

Article information

Article type
Paper
Submitted
09 Nov 2021
Accepted
24 Jan 2022
First published
01 Feb 2022
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2022,12, 3969-3978

Structure and properties of chitosan/sodium dodecyl sulfate composite films

S. Jiang, C. Qiao, X. Wang, Z. Li and G. Yang, RSC Adv., 2022, 12, 3969 DOI: 10.1039/D1RA08218C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements