Issue 45, 2019

Nitrogen and phosphorus co-doped carbon dots as a “turn-off-on” fluorescence probe for the detection of Hg2+ and GSH and cell imaging

Abstract

Nitrogen and phosphorus co-doped carbon dots (NPCDs) were synthesized by a microwave method, using citric acid monohydrate and diammonium hydrogen phosphate as raw materials. The morphology, structures and elemental compositions of NPCDs were characterized by transmission electron microscopy, X-ray diffractometry, and X-ray photoelectron spectroscopy. It was found that NPCDs show good selectivity to Hg2+ over other metal ions. And the fluorescence of the NPCDs-Hg2+ system can be recovered in the presence of glutathione (GSH). As such, a “turn-off-on” fluorescence probe can be constructed for the detection of Hg2+ and GSH. Under the optimum working conditions, the linear response of NPCDs to Hg2+ was in the range 0.10–30 μM with a detection limit of 9.9 nM. The linear range of GSH was 0.50–32 μM with a limit of detection of 11.2 nM. The proposed method has been successfully applied to the detection of Hg2+ and GSH in various biological samples. What is more, NPCDs have low cytotoxicity verified by the MTT assay. Using NPCDs as a probe, fluorescence images were obtained for HepG2 cells, which indicated that it could monitor the levels of Hg2+ and GSH in biological systems.

Graphical abstract: Nitrogen and phosphorus co-doped carbon dots as a “turn-off-on” fluorescence probe for the detection of Hg2+ and GSH and cell imaging

Supplementary files

Article information

Article type
Paper
Submitted
10 Aug 2019
Accepted
07 Oct 2019
First published
18 Oct 2019

Anal. Methods, 2019,11, 5803-5809

Nitrogen and phosphorus co-doped carbon dots as a “turn-off-on” fluorescence probe for the detection of Hg2+ and GSH and cell imaging

X. Yang, M. Zhang, Y. Zhang, N. Wang, W. Bian and M. M. F. Choi, Anal. Methods, 2019, 11, 5803 DOI: 10.1039/C9AY01723B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements