Issue 22, 2014

Sulfur-rich carbon cryogels for supercapacitors with improved conductivity and wettability

Abstract

Sulfur-rich carbon cryogels derived from 2-thiophenecarboxaldehyde and resorcinol were synthesized through sol–gel processing, which demonstrated good stability with less than 4% capacitance loss after 1000 charge–discharge cycles. Pyrolysis of sulfur-rich carbon at higher temperatures resulted in decreased electrical conductivity, which was caused by the degree of graphitization deteriorating at high temperatures. An increased amount of sulfur can effectively improve the wetting behavior of the carbon electrode in organic electrolytes. Specifically, when the sulfur content is 2.5 at%, the electrode was completely wetted. Additionally, pseudocapacitive reactions introduced from sulfur were observed in this electrolyte. Synergistic effects of sulfur and pore structure controlled the final electrochemical properties. The sulfur-containing sample pyrolyzed at 1000 °C had the best specific capacitance and impedance performance. When activated in air without sol–gel processing optimization, the sulfur-modified carbon demonstrated a capacitance of 94.4 F g−1 in organic electrolytes.

Graphical abstract: Sulfur-rich carbon cryogels for supercapacitors with improved conductivity and wettability

Supplementary files

Article information

Article type
Paper
Submitted
20 Feb 2014
Accepted
25 Mar 2014
First published
25 Mar 2014

J. Mater. Chem. A, 2014,2, 8472-8482

Sulfur-rich carbon cryogels for supercapacitors with improved conductivity and wettability

Y. Zhou, S. L. Candelaria, Q. Liu, Y. Huang, E. Uchaker and G. CaO, J. Mater. Chem. A, 2014, 2, 8472 DOI: 10.1039/C4TA00894D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements