Continuous sol–gel derived SiOC/HfO2 fibers with high strength
Abstract
This study presents the fabrication and characterization of continuous SiOC/HfO2 fibers with high strength by the sol–gel process. Continuous polyhafnosiloxane (PHfSO) gel fibers are spun from the solutions of silicon alkoxides and hafnium dichloride using polyvinyl pyrrolidone as a spinning reagent, and then transform into dense SiOC/HfO2 fibers with homogeneous shrinkage by subsequent drying and pyrolysis treatment. Fourier transform infrared and X-ray photoelectron spectra together with X-ray diffraction analysis indicate that the amorphous SiOC/HfO2 fibers consist of mixed silicon oxycarbide (SiOxC4−x, x = 1–4) and tetravalent hafnium–oxygen units embraced with a certain free-carbon phase. Scanning electron microscopy and transmission electron microscopy observations reveal that the SiOC/HfO2 fibers with homogenous Hf distribution exhibit a circular-shaped or an elliptical-shaped cross-section depending on their thickness when employed as gel fibers. Mechanical testing shows that the SiOC/HfO2 fibers exhibit good mechanical property with the maximum tensile strength of 1.5 GPa arising from the incorporation of Hf in the SiOC network.
Please wait while we load your content...
