Issue 31, 2011

Transverse oxidation of gold nanorods assisted by selective end capping of silver oxide

Abstract

An approach for the transverse oxidation of Au nanorods has been demonstrated by selectively capping the ends of the nanorods with Ag2O through a hydrothermal reaction. The tight Ag2O capping protects the ends of the nanorods and restricts oxidation to occurring only at the side surfaces. Such transverse oxidation leads to a gradual reduction in the effective diameter of the nanorods, an increase in the effective aspect ratio, and therefore a red shift in the longitudinal plasmon resonance. The red shift in the longitudinal plasmon resonance can reach up to 250 nm and be controlled by varying the oxidation time. In addition, the Ag2O capping and transverse oxidation process is also applicable for Au nanorods with different longitudinal plasmon resonance wavelengths. Furthermore, the transverse oxidation is nonuniform. It produces dimples on the side surfaces of the Au nanorods. Numerical electrodynamic calculations indicate that the oxidized nanorods exhibit stronger electric field intensity enhancements at the dimples for both the longitudinal and transverse plasmon resonances in comparison to the unoxidized nanorods. We believe that this transverse oxidation approach will be beneficial to the design and preparation of Au nanostructures for various biotechnological applications.

Graphical abstract: Transverse oxidation of gold nanorods assisted by selective end capping of silver oxide

Supplementary files

Article information

Article type
Paper
Submitted
24 Jan 2011
Accepted
04 Mar 2011
First published
29 Mar 2011

J. Mater. Chem., 2011,21, 11537-11543

Transverse oxidation of gold nanorods assisted by selective end capping of silver oxide

Z. Bao, Z. Sun, M. Xiao, H. Chen, L. Tian and J. Wang, J. Mater. Chem., 2011, 21, 11537 DOI: 10.1039/C1JM10371G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements