Issue 12, 2002

Effect of composition and structure of gold/copper bimetallic nanoparticles on dispersion in polymer thin films

Abstract

The effect of composition on the dispersion of AuxCu1 − x bimetallic nanoparticles into a nylon 11 matrix has been investigated. TEM, UV–VIS, EDX, and XPS depth profiling were used for characterizing the changes in the composition of the bimetallic particles and the depth distribution of the particles in the nylon 11 layer caused by annealing in an N2 atmosphere. TEM observation and EDX analysis revealed that island-like bimetallic particles were formed on the nylon 11 surface before annealing, the composition of which was systematically controlled. Upon annealing in an N2 atmosphere, the AuxCu1 − x bimetallic particles with x ≤ 0.55 were not dispersed into the nylon 11 layer while those with x ≥ 0.70 were homogeneously dispersed in the films, indicating the existence of a critical composition for penetration of the bimetallic particles. By comparing the composition and structure of the bimetallic particles, the cause of these finding is discussed in terms of the surface free energy of the particles, which can be varied with their composition by the effect of alloying.

Graphical abstract: Effect of composition and structure of gold/copper bimetallic nanoparticles on dispersion in polymer thin films

Article information

Article type
Paper
Submitted
16 May 2002
Accepted
02 Sep 2002
First published
07 Oct 2002

J. Mater. Chem., 2002,12, 3610-3614

Effect of composition and structure of gold/copper bimetallic nanoparticles on dispersion in polymer thin films

K. Akamatsu, T. Kawamura, H. Nabika, S. Deki, T. Strunskus and F. Faupel, J. Mater. Chem., 2002, 12, 3610 DOI: 10.1039/B207799J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements