A flow injection hydride generation atomic absorption spectrometric (AAS) method has been used to determine the selenium concentrations of human serum and plasma samples following digestion with nitric, sulphuric and perchloric acids. In the hydride generation process, reduction was carried out by sodium tetrahydroborate to produce a hydride that was atomised in a flame-heated atomisation cell. The method had a detection limit of 1.2 ng ml^–1 and a sensitivity of 2.1 ng ml^–1. Within-run precisions of 5.8% at 20 ng ml^–1 and 4.5% at 80 ng ml^–1, and between-run precisions of 4.8% at 69 ng ml^–1 and 3.4% at 80 ng ml^–1 were obtained. An inter-laboratory comparison study with a graphite furnace AAS method was carried out and the results showed excellent agreement. The flow injection method of sample introduction allowed the use of a sample volume of 330 µl with an injection rate of 90 injections per hour.