Addendum to: Nature Protocols https://doi.org/10.1038/s41596-022-00792-6. Published online 6 January 2023.
In the protocol entitled “A ‘print–pause–print’ protocol for 3D printing microfluidics using multimaterial stereolithography,” we described strategies for fabricating transparent biomicrofluidic devices and multimaterial chips using stereolithographic 3D printing1. Since publication, it has been brought to our attention that the term ‘print–pause–print’ (PPP) for 3D printing was first coined in 2017 by another research lab2. We were unaware of this important work at the time of publication but would like to acknowledge that the term originates from the lab of Professor Dana Spence. Our approaches differ in that (1) we apply PPP to stereolithography 3D printing whereas the Spence lab use it for polyjet 3D printing and (2) we use the “pause” in the PPP method to swap resins, thus enabling multimaterial 3D printing with SLA, whereas the Spence lab use the “pause” to enable the manual insertion of objects in a print. It was remiss of us not to discuss their published work and prior use of the term PPP.
References
Kim, Y. T., Ahmadianyazdi, A. & Folch, A. A ‘print–pause–print’ protocol for 3D printing microfluidics using multimaterial stereolithography. Nat. Protoc. https://doi.org/10.1038/s41596-022-00792-6 (2023).
Pinger, C. W., Heller, A. A. & Spence, D. M. A printed equilibrium dialysis device with integrated membranes for improved binding affinity measurements. Anal. Chem. 89, 7302–7306 (2017).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, Y.T., Ahmadianyazdi, A. & Folch, A. Addendum: A ‘print–pause–print’ protocol for 3D printing microfluidics using multimaterial stereolithography. Nat Protoc 18, 1377 (2023). https://doi.org/10.1038/s41596-023-00818-7
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41596-023-00818-7
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.