Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Original Article
  • Published:

Interfacial phase of nylon 6 strongly adsorbed on alumina particles

Abstract

The interfacial phase structures of nylon 6 with alumina nanoparticles were investigated by X-ray diffraction measurements, infrared spectroscopy, and differential scanning calorimetry for composites with high weight fractions (30–70%) of alumina. The melting and crystallization temperatures were decreased by the addition of alumina nanoparticles. Changes in the infrared spectra of the composites suggested that the alumina nanoparticles strengthened the hydrogen bonds of nylon 6 at their interfaces. The composites were dispersed in formic acid, which is a good solvent of nylon 6, and the precipitates were collected by centrifugation. The infrared spectrum and the results of thermal gravimetric analysis suggested the presence of nylon 6 in the precipitate even after washing with formic acid. These results indicate the existence of an interfacial phase where nylon 6 is strongly adsorbed onto alumina nanoparticles, and its crystallization behavior and structure formed by the hydrogen bonds were affected by the interfacial interaction.

This is a preview of subscription content, access via your institution

Access options

Buy this article

Prices may be subject to local taxes which are calculated during checkout

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  1. Holmes DR, Bunn CW, Smith DJ. The crystal structure of polycaproamide: Nylon 6. J Polym Sci. 1955;17:159–77.

    Article  CAS  Google Scholar 

  2. Arimoto H, Ishibashi M, Hirai M. Crystal structure of the γ-form of nylon 6. J Polym Sci Part A. 1965;3:317–26.

    CAS  Google Scholar 

  3. Vogelsong DC. Crystal structure studies on the polymorphic forms of nylons 6 and 8 and other even nylons. J Polym Sci Part A. 1963;1:1055–68.

    CAS  Google Scholar 

  4. Auriemma F, Petraccone V, Parravicini L, Corradini P. Mesomorphic form (β) of Nylon 6. Macromolecules. 1997;30:7554–9.

    Article  CAS  Google Scholar 

  5. Ito M, Mizuochi K, Kanamoto T. Effects of crystalline forms on the deformation behaviour of nylon-6. Polymer. 1998;39:4593–8.

    Article  CAS  Google Scholar 

  6. Zhang Y, Zhang Y, Liu S, Huang A, Chi Z, Xu J, Economy J. Phase stability and melting behavior of the α and γ phases of nylon 6. J Appl Polym Sci. 2011;120:1885–91.

    Article  CAS  Google Scholar 

  7. Murthy NS, Szollosi AB, Sibilia JP, Krimm S. Structure of iodide ion arrays in iodinated nylon 6 and the chain orientation induced by iodine in nylon 6 films. J Polym Sci Polym Part B Phys Ed. 1985;23:2369–76.

    Article  CAS  Google Scholar 

  8. Miyasaka K, Makishima K. Transition of nylon 6 γ-phase crystals by stretching in the chain direction. J Polym Sci Part A: Polym Chem. 1967;5:3017–27.

    Article  CAS  Google Scholar 

  9. Arimoto H. α-γ Transition of nylon 6. J. Polym. Sci. Part A: Polym. Chem.1964;2:2293–95.

    Google Scholar 

  10. Sun L, Yang JT, Lin GY, Zhong MQ. Crystallization and thermal properties of polyamide 6 composites filled with different nanofillers. Mater Lett. 2007;61:3963–6.

    Article  CAS  Google Scholar 

  11. Zyl WE, Garcia M, Schrauwen BAG, Kooi B, De Hosson JM, Verweij H. Hybrid polyamide/silica nanocomposites: synthesis and mechanical testing. Macromol Mater Eng. 2002;287:106–10.

    Article  Google Scholar 

  12. Sarwar M, Zulfiqar S, Ahmad Z. Polyamide–silica nanocomposites: mechanical, morphological and thermomechanical investigations. Polym Int. 2008;57:292–6.

    Article  CAS  Google Scholar 

  13. Bureau MN, Denault J, Cole KC, Enright GD. The role of crystallinity and reinforcement in the mechanical behavior of polyamide‐6/clay nanocomposites. Polym Eng Sci. 2002;42:1897–906.

    Article  CAS  Google Scholar 

  14. Özdilek C, Kazimierczak K, van der Beek D, Picken SJ. Preparation and properties of polyamide-6-boehmite nanocomposites. Polymer. 2004;45:5207–14.

    Article  CAS  Google Scholar 

  15. Li D, Liu Q, Yu L, Li X, Zhang Z. Correlation between interfacial interactions and mechanical properties of PA-6 doped with surface-capped nano-silica. Appl Surf Sci. 2009;255:7871–7.

    Article  CAS  Google Scholar 

  16. Reynaud E, Jouen T, Gauthier C, Vigier G, Varlet J. Nanofillers in polymeric matrix: a study on silica reinforced PA6. Polymer. 2001;42:8759–68.

    Article  CAS  Google Scholar 

  17. Kojima Y, Usuki A, Kawashimi M, Okada A, Fukushima Y, Kurauchi T, et al. Mechanical properties of nylon 6-clay hybrid. J Mater Res. 1993;8:1185–9.

    Article  CAS  Google Scholar 

  18. Ishisue T, Okamoto M, Tashiro K. Real-time investigation of crystallization in nylon 6-clay nano-composite probed by infrared spectroscopy. Polymer. 2010;51:5585–91.

    Article  CAS  Google Scholar 

  19. Wu TM, Liao CS. Polymorphism in nylon 6/clay nanocomposites. Macromol Chem Phys. 2000;201:2820–5.

    Article  CAS  Google Scholar 

  20. Zheng J, Siegel QW, Toney CG. Polymer crystalline structure and morphology changes in nylon-6/ZnO nanocomposites. J Polym Sci Part B: Polym Phys. 2003;41:1033–50.

    Article  CAS  Google Scholar 

  21. Phang IY, Ma J, Shen L, Liu WD. Crystallization and melting behavior of multi-walled carbon nanotube-reinforced nylon-6 composites. Polym Int. 2006;55:71–9.

    Article  CAS  Google Scholar 

  22. Li L, Yang G. Variable-temperature FTIR studies on thermal stability of hydrogen bonding in nylon 6 / mesoporous silica nanocomposite. Polym Int. 2009;58:503–10.

    Article  CAS  Google Scholar 

  23. Matsuda Y, Fukatsu A, Wang Y, Miyamoto K, Mays JW, Tasaka S. Fabrication and characterization of poly(L-lactic acid) gels induced byfibrous complex crystallization with solvents. Polymer. 2014;55:4369–78.

    Article  CAS  Google Scholar 

  24. Wang Q, Wang X, Fang P, Wang D, Dai Y, Wang S, et al. Crystallization behavior of polypropylene/polyamide 6/montmorillonite nanocomposites. Polym Int. 2010;59:1303–9.

    Article  CAS  Google Scholar 

  25. Inoune M. Studies on crystallization of high polymers by differential thermal analysis. J Polym Sci A. 1963;1:2697–709.

    Google Scholar 

  26. Fornes TD, Paul DR. Crystallization behavior of nylon 6 nanocomposites. Polymer. 2003;44:3945–61.

    Article  CAS  Google Scholar 

  27. Schroeder LR, Cooper SL. Hydrogen bonding in polyamides. J Appl Phys. 1976;47:4310–7.

    Article  CAS  Google Scholar 

  28. Loo LS, Gleason KK. Insights into structure and mechanical behavior of α and γ crystal forms of nylon-6 at low strain by infrared studies. Macromolecules. 2003;36:6114–26.

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yasuhiro Matsuda.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Matsuda, Y., Okuda, K. & Tasaka, S. Interfacial phase of nylon 6 strongly adsorbed on alumina particles. Polym J 52, 1121–1127 (2020). https://doi.org/10.1038/s41428-020-0359-0

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41428-020-0359-0

This article is cited by

Search

Quick links